Reason: how to use vocoder for analysing?

TranceAddict Forums (www.tranceaddict.com/forums)
- Production Studio
-- Reason: how to use vocoder for analysing?

Posted by DjSimonB on Oct-08-2004 16:48:

Reason: how to use vocoder for analysing?

It's been mentioned a few times that the Vocoder on Reason can also be used to analyse frequencies, but how do I do that? I'm planning on splitting the audio from the mixer so that it goes to the hardware interface, but also to a vocoder, but I don't know how to view freq's on the vocoder (overall freqs I mean, kinda like a spectrum analyser)

It's not the most important thing in the world but it would be nice to know, thanks (probably the answer is something stupid I didn't think of)

Posted by Danne__85 on Oct-08-2004 18:59:

I made a reason file for you (Reason 2.5).

Let me know if it was what you wanted.

Reason file: http://www.lnctv.com/~a41154a/ovrig...%20analyser.rns

Posted by robin on Oct-08-2004 20:45:

intresting

does anyone have a list of what band belongs to what frequency range?

robin

Posted by DjSimonB on Oct-09-2004 11:53:

quote:
Originally posted by Danne__85
I made a reason file for you (Reason 2.5).

Let me know if it was what you wanted.

Reason file: http://www.lnctv.com/~a41154a/ovrig...%20analyser.rns

Seems to work, except for one thing - only the left output is connected to the vocoder, so won't that mean I'm only getting a picture of the left stereo channel?

Posted by Jarjar on Oct-09-2004 12:06:

quote:
Originally posted by DjSimonB
Seems to work, except for one thing - only the left output is connected to the vocoder, so won't that mean I'm only getting a picture of the left stereo channel?

Yeah, it will. You can fix this using 2 spiders though.
Try this: .rns linky

Seems to work, and the sound isn't changed.

Edit: I updated it to only use 1 spider, I realized the second one wasn't necessary at all.

Posted by Danne__85 on Oct-09-2004 13:03:

Sorry. My mistake.