TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- Canada - Toronto & Southern Ont.
-- Yet another computer help thread
Pages (2): « 1 [2]


Posted by DigitalMP on Feb-22-2006 17:48:

btw, the link lights mean you're getting juice from the router or modem (in this case the router), so that's good. however, we know it works on occasion.

i think it's software on your computer that's killing your connection. answer my previous post and we'll figure it out.


Posted by milos on Feb-22-2006 17:55:

DHCP clearly isn't doing its job properly if she has an IP but not a default gateway. and i'm assuming shes getting a proper IP and not a 169.254 address.

go to start - settings - control panel - administrative tools - event viewer

under system look for any warnings for "Tcpip" (under source column). double click the message and paste what it says


Posted by me@t k@tie on Feb-22-2006 17:55:

quote:
Originally posted by DigitalMP
the router's working because she's obviously been posting on it from another pc ths entire time.

from this computer, type in ipconfig and list the default gateway here. also, enter that in the address bar of your browser, and see if it display the router's configuration utility.

do you know if you're running 3rd party firewall software on your computer? norton/zone alarm? which version of windows? xp?

192.168.0.1

and i am looking at the DHCP section, and i see my computer name:

klein-g5ip7bgv0 192.168.0.8 00-80-c8-fa-0f-76 Feb/27/2006 14:43:59
k what should i do now? lol


Posted by DigitalMP on Feb-22-2006 18:03:

quote:
Originally posted by milos
DHCP clearly isn't doing its job properly if she has an IP but not a default gateway. and i'm assuming shes getting a proper IP and not a 169.254 address.

go to start - settings - control panel - administrative tools - event viewer

under system look for any warnings for "Tcpip" (under source column). double click the message and paste what it says


she already said she's getting an auto-config ip...read the thread buddy.


meat, the router recognizes you from past sessions. your problem is that you can't stay connected and it drop, for whatever reason.

i'll ask again - which your firewall/security software are you running?


Posted by me@t k@tie on Feb-22-2006 18:09:

quote:
Originally posted by DigitalMP
she already said she's getting an auto-config ip...read the thread buddy.


meat, the router recognizes you from past sessions. your problem is that you can't stay connected and it drop, for whatever reason.

i'll ask again - which your firewall/security software are you running?

iunno....
mozilla? lol


Posted by me@t k@tie on Feb-22-2006 18:20:



sorry that its so big...i didnt think it would show the other monitor as well lol....

um was this even something you need to see?


Posted by Porky on Feb-22-2006 18:22:

quote:
Originally posted by me@t k@tie shows my autoconfiguration IP address,



that might be your problem katie

if your computer is set for APIPA, then it will automatically search for an IP address in the 169.254.0.1 - 169.254.255.254 255.255.0.0 range, to bypass dhcp. this resets ur ip when dhcp is not available. you can tell if APIPA is configured if when you type ipconfig, you get AUTOCONFIGURATION IP ADDRESS = ENABLED

if u want i can help u on IM


Posted by me@t k@tie on Feb-22-2006 18:27:

quote:
Originally posted by Porky
that might be your problem katie

if your computer is set for APIPA, then it will automatically search for an IP address in the 169.254.0.1 - 169.254.255.254 255.255.0.0 range, to bypass dhcp. this resets ur ip when dhcp is not available. you can tell if APIPA is configured if when you type ipconfig, you get AUTOCONFIGURATION IP ADDRESS = ENABLED

if u want i can help u on IM



[email protected]


Posted by DigitalMP on Feb-22-2006 18:30:

quote:
Originally posted by Porky
that might be your problem katie

if your computer is set for APIPA, then it will automatically search for an IP address in the 169.254.0.1 - 169.254.255.254 255.255.0.0 range, to bypass dhcp. this resets ur ip when dhcp is not available. you can tell if APIPA is configured if when you type ipconfig, you get AUTOCONFIGURATION IP ADDRESS = ENABLED

if u want i can help u on IM



if you can't communicate with the router, dhcp server isn't reachable, and APIPA is automatically enabled. disabling that is done by troubleshooting the connectivity, and i think she has 3rd party security software that's knocking her connection out.


Posted by me@t k@tie on Feb-22-2006 18:33:

wow im really confused now


Posted by me@t k@tie on Feb-22-2006 18:36:

Device Information
Firmware Version: 2.70 , Wed 27 Jul 2005
LAN
MAC Address 00-0f-3d-5a-c2-52
IP Address 192.168.0.1
Subnet Mask 255.255.255.0
DHCP Server Enabled

WAN
MAC Address 00-0f-3d-5a-c2-53
Connection DHCP Client Connected
IP Address 72.140.123.221
Subnet Mask 255.255.255.128
Default Gateway 72.140.123.129
DNS 64.71.255.198

Wireless JumpStart
JumpStart Disabled
Status Disabled

Wireless 802.11g
SSID router
Channel 6
Encryption 128 bits


should i click on DHCP release or DHCP renew (even though this isnt my computer)?


Posted by DigitalMP on Feb-22-2006 18:36:

quote:
Originally posted by me@t k@tie
wow im really confused now


that wasn't for you, meat.


Posted by me@t k@tie on Feb-22-2006 18:38:

quote:
Originally posted by DigitalMP
that wasn't for you, meat.

good.


Posted by DigitalMP on Feb-22-2006 18:40:

quote:
Originally posted by me@t k@tie
should i click on DHCP release or DHCP renew (even though this isnt my computer)?


no...understand that the problem is not with the router, because the computer you're on is obviously working ok, so the problem is solely with your computer.

additionally, it's not a setting in your computer, becuas eit works sometimes. there is something interfering and knocking your connection off.

it's either a cable, some software on your computer, or a bad port on that router.

1. on the physical router, is there an empty port numbered 1-4? if so, unplug yours, and plug it into there.

2. on your computer, do you have norton? zone alarm? mcafee? mouseover the icons near the clock - one of those should be your security software suite.


Posted by Porky on Feb-22-2006 18:48:

yo digitalmp

how about this?

go into registry and hardcode the dhcp range. eg... STOP at 192.168.1.200


then set katie's ip to a static 192.168.1.210

would this work?

i remember reading about this.. would have to dig up my notes on where to go in regedit


Posted by me@t k@tie on Feb-22-2006 18:49:

quote:
Originally posted by DigitalMP
no...understand that the problem is not with the router, because the computer you're on is obviously working ok, so the problem is solely with your computer.

additionally, it's not a setting in your computer, becuas eit works sometimes. there is something interfering and knocking your connection off.

it's either a cable, some software on your computer, or a bad port on that router.

1. on the physical router, is there an empty port numbered 1-4? if so, unplug yours, and plug it into there.

2. on your computer, do you have norton? zone alarm? mcafee? mouseover the icons near the clock - one of those should be your security software suite.


ps. iunno if this matters, but the computer was put together by me and my friend (mostly my friend) and we built it using old parts and such. and i used to have problems with the connection before at my old place, and i think my network card is always lose...but the fact that its lighting up kinda states that its working and is in the slot


Posted by Porky on Feb-22-2006 18:51:

quote:
Originally posted by me@t k@tie
ps. iunno if this matters, but the computer was put together by me and my friend (mostly my friend) and we built it using old parts and such. and i used to have problems with the connection before at my old place, and i think my network card is always lose...but the fact that its lighting up kinda states that its working and is in the slot



omg roflcopter

worst case scenario.. u can go to canadacomputers or futureshop and buy a NIC (network card) for a cheap 20bux


Posted by DigitalMP on Feb-22-2006 18:54:

quote:
Originally posted by me@t k@tie
ps. iunno if this matters, but the computer was put together by me and my friend (mostly my friend) and we built it using old parts and such. and i used to have problems with the connection before at my old place, and i think my network card is always lose...but the fact that its lighting up kinda states that its working and is in the slot


don't go anywhere. i'll be right over to toss you over a bridge.


Posted by me@t k@tie on Feb-22-2006 18:56:

quote:
Originally posted by DigitalMP
don't go anywhere. i'll be right over to toss you over a bridge.

LOL!!


Posted by Porky on Feb-22-2006 19:18:

digital mp

i've been troubleshooting with her and

1. on computer working
ping to router/dg 192.168.0.1 works fine


2. on computer not working
cannot even ping to router 192.168.0.1
-- tried netstat.. no ip activity at all
i'm thinking maybe replacing the nic out?


Posted by DigitalMP on Feb-22-2006 19:28:

quote:
Originally posted by Porky
digital mp

i've been troubleshooting with her and

1. on computer working
ping to router/dg 192.168.0.1 works fine


2. on computer not working
cannot even ping to router 192.168.0.1
-- tried netstat.. no ip activity at all
i'm thinking maybe replacing the nic out?


if she told me she was having previous problems before she moved, and then told me the loopback ping was successful, i would have called that right off the bat.

the nic can be tested in another pc as well, but it's the likely culprit here.


Posted by me@t k@tie on Feb-22-2006 19:46:

im pleased to say that i will be getting a new card soon. thanks everyone for your help!!! *muah!*


Pages (2): « 1 [2]

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.