TranceAddict Forums (www.tranceaddict.com/forums)
- Canada - Toronto & Southern Ont.
-- Computer nerds: Critique my next build - CAD machine
Pages (3): « 1 2 [3]
Also get Windows Xp with the newest upgradest and hotfixes... AutoCad will performe way better with XP. Vista has to many bugs.... to begin with.
my turd 2-3 year old Dell Laptop (600m)
with 1.6ghz pentium M
1 gig ram
runs these programs just fine:
Catia
Inventor 11
AutoCad 2007
Solid Edge
Mastercam X
3dStudio Max
etc
| quote: |
| Originally posted by VERTiG0 So after a bit more research, seems the Xeon X3220s aren't showing up in anybody's hands with G0 steppings, so I'm just going to go with a Core 2 Quad Q6600 - which means I don't need that ridiculous motherboard anymore to accomodate a Xeon. And, because Core 2 chips see their biggest increases in performance when memory and FSB are at a 1:1 ratio, I'll scale back to 800MHz memory... OCZ Platinum XTC Rev.2 PC2-6400 CL4-4-4-15. I'd prefer Crucial Ballistix, but for $80 less, and the minimum RAS active time is only 3 cycles slower than the Ballstix, I'll go with OCZ. Then I played the Bioshock demo the other day, and I forgot what a Quadro was. So then: Antec P182 case Seasonic 620w PSU Intel Core 2 Quad Q6600 Thermalright Ultra-120 eXtreme HSF with a 120mm Yate Loon Gigabyte GA-P35-DS3L motherboard 2GC OCZ Platinum XTC Rev.2 PC2-6400 RAM 500GB Seagate SATA hard disk eVGA GeForce 8800GTS 320MB Gonna run 8x400 on the multiplier and FSB to reach at 3200MHz, thus keeping the FSB and RAM at the desired 1:1 ratio. |
Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.