TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- Bedroom DJs...Post Pics of Your Setup Here :)
Pages (379): « 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 [311] 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 »

In the picture for mixing:
Allen & Heath Xone:3D
2 Pioneer CDJ1000
Technics RP-DH1200 headphones
Mac Book Pro with:
Serato Scratch Live
Intel Centrino Duo with:
Ableton Live 6
2 Yamaha HS80M studio monitor
WD My Book 320GB external hard drive (music library)

In the picture for music production:

Mac Book Pro with:
Logic Studio 8
Albino 3
Vanguard
Nexus (I love it!)
Pro-53
Novation Bass Station
T.C. Powercore Compact
M-Audio Firewire Solo

Not in the picture:
Clavia Nord Lead 3
Access Virus C Desktop
M-Audio Axiom-25

quote:

Originally posted by thesilversurfer In the picture for mixing: Allen & Heath Xone:3D 2 Pioneer CDJ1000 Technics RP-DH1200 headphones Mac Book Pro with: Serato Scratch Live Intel Centrino Duo with: Ableton Live 6 2 Yamaha HS80M studio monitor WD My Book 320GB external hard drive (music library) In the picture for music production: Mac Book Pro with: Logic Studio 8 Albino 3 Vanguard Nexus (I love it!) Pro-53 Novation Bass Station T.C. Powercore Compact M-Audio Firewire Solo Not in the picture: Clavia Nord Lead 3 Access Virus C Desktop M-Audio Axiom-25

Needs a username and password for the picture....

As promised, here are some pictures :

2x CDJ800MK2
1x Xone:92 Linear (Mixer)
1x EFX1000 (FX Processor)
1x HDJ1000 (Headphones)
1x PVDJ Grabber
3x RoadReady RoadCases (Mixer + CDJs)
1x Space-Tek Universal CDJ Stand (for EFX)
1x Sefour X10












Now I need some KRKs but I don't know how to place. An expensive solution would be to get 2 others Space-Tek stands and put the KRKs with the cdjs below them...Any ideas ? I could also make custom stands because home theater stands are usually 80cm high when I need nearly 120cm minimum...this would be less expensive but I'm not very good at handwork.

Neo Hacker man...

I think you're turning into a bit of a gear nut, lets hear a decent mix of yours before you continue buying so much stuff!

That looks awesome! I love the pic of it in the dark!

what do u think of the pvdj ? is it worth it?

quote:

Originally posted by Hasneez what do u think of the pvdj ? is it worth it?

Paid about 100$ instead of 300$ at pssl.com (it was a big promo)

I'm very satisfied with it. I received it few days ago and have been very busy this week so I haven't been able to mix a lot but so far, I find this little device to be very cool !

how did you route your pvdj grabber? contemplating picking one up but i really dont like the idea of going through my headphone jack. would rather use the send/returns on my mixer.

quote:

Originally posted by i got big pants how did you route your pvdj grabber? contemplating picking one up but i really dont like the idea of going through my headphone jack. would rather use the send/returns on my mixer.

i think i can answer this one.
i bought a redsound soundbite xl maybe six months ago. back then i had a vestax pcv-175 mixer which does have sends and returns on it. my initial idea was to hook it up on the sends. however it didn't work as the sends are post fader only, so you'll have to have the fader up for the sends to send anything on that particular channel. then i thought about hooking it up on the headphone jack as advised on the manual. this didn't work either as the sound coming from there was way too quiet and i couldn't get the levels to match on the mixer no matter how much i boosted the gain. so i had to crank the headphone level to ridiculous levels to get anything with loud enough sound to be sampled.
i was rather pissed off.
then i found out that the xone:92 has aux sends which you can choose to be either post or pre fader, so it would work great with the xone. i had been wanting to get a xone:92 rotary for ages anyway and now i had a great excuse for getting one. so i got one and hooked the soundbite on the aux1 out and the input on the 3rd channel of my xone. works like a charm now. and i suspect that Neo Hacker has it hooked up like i have.
so i wouldn't advise on getting one unless you have a mixer with pre fader sends.

quote:

Originally posted by SVGmethod haha my new set up:

how much did u paid for that?

im sure that he payed just about enough!

yup that's how I hooked it up ! My EFX is hooked up that way also Both are going back to main faders so I can use filters on them.

quote:

Originally posted by skip i think i can answer this one. i bought a redsound soundbite xl maybe six months ago. back then i had a vestax pcv-175 mixer which does have sends and returns on it. my initial idea was to hook it up on the sends. however it didn't work as the sends are post fader only, so you'll have to have the fader up for the sends to send anything on that particular channel. then i thought about hooking it up on the headphone jack as advised on the manual. this didn't work either as the sound coming from there was way too quiet and i couldn't get the levels to match on the mixer no matter how much i boosted the gain. so i had to crank the headphone level to ridiculous levels to get anything with loud enough sound to be sampled. i was rather pissed off. then i found out that the xone:92 has aux sends which you can choose to be either post or pre fader, so it would work great with the xone. i had been wanting to get a xone:92 rotary for ages anyway and now i had a great excuse for getting one. so i got one and hooked the soundbite on the aux1 out and the input on the 3rd channel of my xone. works like a charm now. and i suspect that Neo Hacker has it hooked up like i have. so i wouldn't advise on getting one unless you have a mixer with pre fader sends.

Well this blows donkey wiener. All the channels on my Xone:3D are bleeding. Basically, if I put them all down to 0 they bug and bleed through to the point it's like having the fader at +10db, but when I place them about a millimeter away from absolute 0 they stay mute. Weird

quote:

Originally posted by djsphere how much did u paid for that?

who's the chick with the big cans?

By cans you mean headphones right?

Simple, but I love it

where did you get the stands from?

i also have those stands.. got mine from http://www.musiciansfriend.com/prod...Free?sku=452067

you can get it from almost any online stores that deals with dj & lighting.

Not that it's my every-day setup, but here's pics of a DJ booth a buddy of mine and I built in my house, and of the party that came as a result of it.

We didn't get the cops until 2 AM...haha.





















^ I know I'm begging for my buddy A.J. to get Photoshopped in that last one... haha.















^ The garage...smoking area.











Here are pics of A.J. and I constructing the DJ booth.

wow nice place to have a staircase like that

quote:

Originally posted by david.michael Not that it's my every-day setup, but here's pics of a DJ booth a buddy of mine and I built in my house, and of the party that came as a result of it. We didn't get the cops until 2 AM...haha.

I wish I was invited to your houseparty.. Lasers, moving heads, .. really nice indeed!

Thanks guys!

Wish I had videos from that night... all I have is this shitty phone-cam capture of me testing the laser, which doesn't do it justice at all.

http://www.youtube.com/watch?v=AwKV3N3z-0s

WOW that looks fking awesome!

Fricking superclub set up and lighting for a house party lol.

Wow, awesome setup. What's the make of that laser and how much? I bet it was pricey.

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.