TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- Frequently Asked Questions / Tutorials / How do I?
-- Guide on the tranceaddict chat room
Pages (2): [1] 2 »


Posted by jon on May-16-2003 16:05:

Dog Running [INFO] Guide on the tranceaddict chat room

Server: irc.webchat.org chan: #tranceaddicts for those of you who have a irc client.

Right i was a bit bored and saw a few threads recently asking about the chat room, so hers a step by step guide, hope it works ok!


1. Download mirc from www.mirc.com

2. Install mirc and run mirc

3. Uncheck the circled text box, and close the small message box by clicking on the x


4. Enter in your name, email (i suggest a web based service like hotmail, to reduce spam), nickname and an alternative (i suggest using your nickname with a _ or ^ on the end of it)


5. From the drop down list select the webnet random server


6. Select options, i suggest the following settings: enable "conect on start up" & "reconect on disconection", and disabling "popup conect dialog on start up"


7. Select the perform options, tick the "enable perform on connect" tick box. Click on the "add" button and select "webnet" and press ok


8. If the drop down box to the left of the "add" button doesnt change to say "webnet" select it from the drop down list. In the perform box type "/umode -M" and press enter


9. Click on "ok" on the main options.

10. Mirc should then conect to the irc server, if you do not see a load of text appear then try closing mirc and opening it again.

11. Now hopefully you will be conected to the server, you need to register your nickname (its not necessart but recomended)

12. To do this type "/msg nickserv register MypassworD [email protected]" replacint the email and password for your own

13. Up to 15 minuts later a email will arive asing you to verify it, in the email will be instructions on how to verify your nickname.

14. After verifying your nickname goto "file-options" and select the "perform" option

15. After the "/umode -M" line write the following "/ns identify MypassworD" obviousley replacing MypassworD for your password. This will save you having to identify your self manually when you load mirc up.

16. After the "/ns identify MypassworD" write "/join #tranceaddicts"



17. The folowing script can be added as well, as at random times the nickname process asks for the nicknames to be identified again, this script will identify your nick automacally, replacing password for your own obviousley. (thanks to ProjectT for this )

quote:
on 1:NOTICE:This nickname is owned by someone else. You must select a different one.*:?:{
/nickserv identify password
}


After this is done you will need to close down mirc and restart it, hopefully you will be conected to the tranceaddict chat! enjoy the stay.

[UKTA CHAT]
The UKTA chat channel is on the same server as the tranceaddict one so its simple to come and join #UKTA

1. Goto the file menu, select options, select perform and on the drop down box select WEBNET.

2. Under the "/join #tranceaddict" type "/join #ukta"



3. Restart mirc and you should now be chatting in the #UKTA channel as well
9b][ontario / toronto chat room][/b]
Exactly as for #ukta but replace #ukta with #tota.
ontario / toronto chat room
[AUTA CHAT]
The AUTA chat is located on a different irc server - irc.austnet.org chan - #tranceaddict

To setup mirc to conect to multiple servers on start up a little work is needed.

1. load up mirc and let it conect to the tranceaddict chat as normal

2. press the "alt" key and the "r" key at the same time, and the folowing box will appear (there may be some text in here allready depending on if you have installed any scripts etc)


In that text box the following code will need to be added :
quote:
on *:start:{ server irc.webchat.org
server -m irc.austnet.org
}


After entering in that text press ok

3. Goto the file menu - options then select perform. Click on the "add" button and select "austnet" and press ok

4. If the drop down box to the left of the "add" button doesnt change to say "austnet" select it from the drop down list. In the perform box type "/join #tranceaddict"

5. Then click ok and restart mirc, hopefully it should conect to the 2 servers and you should be chatting in the AUTA #tranceaddict, the main #tranceaddict chat (and any other regional chat channles you decide to chat in

I dont know how the irc.asutnet.org servers handel nick name registrations atm so could a AUTA give a few lines of instructions maybee


Posted by .montecarlo. on May-16-2003 19:39:

nice work... should be helpful


Posted by jdat on May-16-2003 20:45:

humm nice job but doesn't resolve our little issues that have been discussed in 3 or so threads in the chillout forum


Posted by jon on May-16-2003 20:49:

quote:
Originally posted by jdat
humm nice job but doesn't resolve our little issues that have been discussed in 3 or so threads in the chillout forum


aye but atleast the newbies can get into chat easily enough, and if they come into #ukta asking for mp3's then its kick ban time

also are there any other regional forum irc chans that could be added to the list?


Posted by arctic on May-17-2003 03:37:

I think theres an aussie one....
EDIT: it's #tranceaddict on ausnet


Posted by Creamfields23 on May-17-2003 06:38:

Thumbs up

Thanx man!!! Was just 2 lame to figure that Irc out

And also this should be sticky


Posted by flystyler on May-17-2003 12:28:

I can see the link of this thread being used a lot

Good work mate


Posted by jon on May-17-2003 13:43:

quote:
Originally posted by arctic
I think theres an aussie one....
EDIT: it's #tranceaddict on ausnet


cheers - updated the instructions so mirc can chat in both servers automacally


Posted by Luke Terry on May-17-2003 14:06:

Cool

nice 1 jon,

u can add this to remote for nick auto-register too...

on 1:NOTICE:This nickname is owned by someone else. You must select a different one.*:?:{
/nickserv identify password
/chanserv op #channel user
}


Posted by TrAnCeAkI on May-18-2003 01:17:

yay jon that is definatly helpful for the ones who do not know how to connect!!!


Posted by arctic on May-21-2003 08:42:

Thanks for adding the humble aussie room

And luke, what about a sticky


Posted by jon on May-21-2003 09:12:

quote:
Originally posted by arctic
And luke, what about a sticky


his authoritah does not cover this room so we can all post "luket is a f00l" messages here HEH


Posted by arctic on May-22-2003 10:08:

lol, forgot about that

"luke be teh n00b, teh fooo, he be own3d, what a git"


Posted by Luke Terry on Jun-01-2003 11:20:

Cool

quote:
Originally posted by arctic
lol, forgot about that

"luke be teh n00b, teh fooo, he be own3d, what a git"


i want my mummy


Posted by roeland on Jun-07-2003 13:59:

thanks

Hi,

Thanks a lot for this clear description. I was until now not aware of the existence of the irc-channels mentioned here.

Grtz
R


Posted by Luke Terry on Jun-11-2003 15:09:

Cool Re: thanks

quote:
Originally posted by roeland
Hi,

Thanks a lot for this clear description. I was until now not aware of the existence of the irc-channels mentioned here.

Grtz
R


jon, u are spreading to the masses, good effort


Posted by fitom tiel on Jun-24-2003 03:35:

quote:
Originally posted by jonsimmonds
aye but atleast the newbies can get into chat easily enough, and if they come into #ukta asking for mp3's then its kick ban time

also are there any other regional forum irc chans that could be added to the list?


#LTA on webnet

thank ye


Posted by jon on Jun-24-2003 09:52:

quote:
Originally posted by emono
#LTA on webnet

thank ye


thanks, i cant edit my thread no more, so I will write up some instructions and pester a mod to edit the post for me


Posted by maria111 on Jun-24-2003 19:50:

hi can anyone use this???


Posted by jon on Jun-24-2003 20:18:

quote:
Originally posted by maria111
hi can anyone use this???


yeah for sure the chatroom is for everyone (so long as you behave and dont abbuse people to much etc etc)


Posted by seldor on Jul-13-2003 17:24:

nice help realy helpfull to newbies , but there could be server name or network name in start of help , i had to look for serveradress for several minutes


Posted by arj1o1 on Sep-21-2003 12:22:

now i understand why i couldnt connect i had to register


Posted by jon on Sep-21-2003 12:26:

quote:
Originally posted by seldor
nice help realy helpfull to newbies , but there could be server name or network name in start of help , i had to look for serveradress for several minutes


done


Posted by arj1o1 on Sep-21-2003 12:40:

quote:
Originally posted by jon
done


u changed ur name


Posted by jon on Sep-21-2003 13:03:

quote:
Originally posted by arj1o1
u changed ur name


you only just noticed? :P


Pages (2): [1] 2 »

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.