gooseneck lamps - TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- gooseneck lamps

Posted by S-a-M-u-E-l on Mar-07-2004 18:50:

gooseneck lamps

where do they plug into?

Posted by opianstate on Mar-08-2004 01:29:

mine plugs into the BNC? outlet on the top of my mixer . . . some mixers have an outlet for them and some don't.

Posted by Dj Flesch on Mar-08-2004 03:18:

The input is better known as the microphone input. It has three holes on the bottom inside of a female O plug

Posted by Dj Thy on Mar-08-2004 12:08:

Depends, there are two connections : the XLR input like Flesch says, and the BNC connector like opianstate says (that one is coaxial, same connector as on older Ethernet cards).

But a lot of mixers don't have a dedicated light connection at all, so if that's the case, you'll need a lamp with an external PSU.

Posted by Dj Spiel on Mar-11-2004 05:07:

So thats where it goes lol

Posted by PVD fanatic on Mar-12-2004 14:34:

so for the mic input for my pioneer djm-500 mixer what kind of lamp coudl i use? or what would i be looking for as far as out of the lamp?

Posted by Dj Thy on Mar-12-2004 21:05:

Don't mistake the lamp connection with a mic connection. They can both have the same connection (XLR) but it doesn't mean that you can plug the lamp in the microphone input.

As far as I remember the DJM500 has no dedicated lamp connection, so you'll have to find a lamp with external PSU.