My JP8000 vol sound rather soft! - TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- Production Studio
-- My JP8000 vol sound rather soft!

Posted by josh on Oct-16-2004 12:30:

My JP8000 vol sound rather soft!

I had plug my JP8000 Left Right cables to my M Audio Delta 6/6 (Input 3 and 4)

But somehow, I do not know why was it so soft. I had even turn the JP8000 Vol to the max but its still very soft!!

I checked with my M Audio Delta Control Panel, everything was on full volume. And I had even tried pluging to my DJ mixer and play out the music and it was loud also! Everything seem fine but only to the JP8000 is soft.

Anyone care to guide me along and explain why is this so??

Thanks

Posted by Dj Thy on Oct-16-2004 17:15:

Same here as for the above post of nzo. Have you already tried setting your inputs at -10 dBV. If I remember well, the M-audio cards have individual sensitivity settings for each I/O. If I remember even better, I think there's even an inbetween settings called consumer (ironically, -10 dBV is the consumer standard). +4 dBu is for pro levels, and the least sensitive setting. Your input will be driven harder if you change the sensitivity setting.

Posted by Derivative on Oct-16-2004 18:14:

also and same with the nzo post, any instrument without a preamp built into it hooked directly into a soundcard with no preamp (like the delta 66) will yield tiny miniscule volume. i assume with your dj mixer you've got that hooked up to active monitors and the JP is playing loud cuz your monitors have preamps in em.

Posted by bachatu on Oct-16-2004 19:52:

From what you have said, it sounds like you have isolated that sound issue has to do with the JP-80XX.

Try this:
On the JP80X0, each patch has what they call "patch gain", to add additional volume to the patch or patch within a performance that your working with. You can add an additional +6db or +12db. To go into this menu, select "edit", then navigate through the "patch" menu/button til you see "patch gain". Then, adjust to your liking.

Posted by josh on Oct-17-2004 02:49:

Thanks all for the help.

I'll be lookin into the patch gain in the JP now.

THanks. My M Audio are set properly..

THanks to all once again!

Posted by josh on Oct-19-2004 02:38:

Brat, JP8080 and JP8000 are different. Who is holding JP8000 which you all might be able to help me out on the gain?

Or shall I plug back to my Mixer to boost the sound?? Anione??