TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- Chill Out Room
-- Moving files from desktop to laptop
Pages (2): [1] 2 »


Posted by sensorium on Jan-14-2005 05:58:

Moving files from desktop to laptop

How do I do it?


Posted by Fast Turtle on Jan-14-2005 05:58:

With a network...?


Posted by sensorium on Jan-14-2005 06:00:

I can't do that because of the desktop.


Posted by Fast Turtle on Jan-14-2005 06:02:

Can you be more specific about the OS/hardware/etc of your computer?


Posted by DJ FC on Jan-14-2005 06:03:

FLOPPY DISK

(burn a CD)

Delete your files and re-create them!


Posted by ShadoWolf on Jan-14-2005 06:06:


Posted by DJ FC on Jan-14-2005 06:11:



ask SADDAM


Posted by sensorium on Jan-14-2005 06:19:


Brand -Compaq
Floppy Drive -3.5" 1.44 MB floppy
Form Factor -Mini Tower
Hard Drive Interface D-MA/ATA-100 (Ultra)
Installed Cache Memory -64 KB
Manufacturer Part Number -470016-303
Max. Video Resolution -1600 x 1200
Modem Type -Fax / Modem
Operating System Microsoft -Windows ME
Optical Drive Type -CD-RW
Processor Manufacturer -AMD
Processor Type -AMD Duron
Processor Upgradability -Upgradable
RAM Technology -SDRAM
Video Output Interface -AGP 4x
Installed Memory -128 MB (SDRAM)
Processor -AMD Duron 900 MHz
Recommended Use -Home Use
Installed RAM -128 MB
Max Supported RAM -768 MB


Posted by sensorium on Jan-14-2005 06:20:

quote:
Originally posted by DJ FC
ask SADDAM


He's currently unavailable.


Posted by Fast Turtle on Jan-14-2005 06:21:

does the laptop have an ethernet port?


Posted by madhattared on Jan-14-2005 06:22:

what do u want to do with it?


Posted by sensorium on Jan-14-2005 06:28:

quote:
Originally posted by Lephaid
does the laptop have an ethernet port?


It doesn't. I was thinking, after doing some poor research, of getting some software to do it through some USB connection.


Posted by Fast Turtle on Jan-14-2005 06:32:

quote:
Originally posted by ierxium
It doesn't. I was thinking, after doing some poor research, of getting some software to do it through some USB connection.


that might work... not really familiar on how those work, though.


Posted by sensorium on Jan-14-2005 06:45:

The software along with the cables costs $60.00. I think I'm better off burning some CDs. But some videos won't fit. Oh well.

Thanks for the help.


Posted by Fast Turtle on Jan-14-2005 06:55:

quote:
Originally posted by ierxium
The software along with the cables costs $60.00. I think I'm better off burning some CDs. But some videos won't fit. Oh well.

Thanks for the help.


you can always split them up with winrar or whatever.


Posted by Spacey Orange on Jan-14-2005 07:08:

Re: Moving files from desktop to laptop

quote:
Originally posted by ierxium
How do I do it?


i had the same problem recently. depending how much you want to transfer, i think the cheapest way, without burining on to discs or copying on to floppies, is to have a direct cable connection. the cables are about 12 or so (or better yet try to borrow one) and its pretty fast. windows has a wizard to help you, but check out the these links---->

Windows Networking: Direct Cable Connection

Tech Support Guy: Internet and Networking


Posted by La5eR on Jan-14-2005 07:08:

Alright if you have a switch or a router heres the exact steps.

1) Open up network connections in control panel.
2) click on the "Set up a home or small office network" its under network tasks if you dont have that drop down box dropped down.
3) hit next
4) hit next
5) select other
6) hit next
7) select the "this comupter connects ot the internet directly through a network hub......
8) hit next
9) hit next
10) enter a computer name(make something up) leave description blank.
11) enter a workgroup name(make something up)
12) hit next
13) select the just finish option
14) hit ok.
15) reboot if you have to
16) reopen network connections
17) right click on your most used connection it should be under "LAN or High-Speed Internet"
18) go to properties
19) click on the advanced tab
20) uncheck the "protect my computer and network by...."
21) hit apply.
repeate steps 1 through 21 for the other computer but this time give it a different computer name but make sure its in the same work group

22) After all that is said and done you go to the folder you want to share
23) right click on the folder
24) go to properties
25) go to the sharing tab
26) check "share this folder on the network"
27) go to start on the other computer
28) go to run
29) type in \\{the other computers name} with out the { and }
30) hit enter
31) then copy the files over.
32) repeat steps 22 to 325 as necessary but this time do it to a different folder. but make sure to unshare the ones you dont wish to share anymore.


Posted by sensorium on Jan-14-2005 07:36:

quote:
Originally posted by Spacey Orange
...is to have a direct cable connection. the cables are about 12 or so (or better yet try to borrow one) and its pretty fast. windows has a wizard to help you...


What cables?



quote:
Originally posted by josh4
Don't give up so easily. I'm sure the COR is more than willing to help such a (apparently) respected contributor. Especially since you went so far as to make a thread about it, you never make threads.

We'll need to know what kind of internet connection you have, disk drives (CD, Floppy, DVD, Zip), type of files you'll be transfering, and...?

There are programs available that will chop the files up into numerous seperate files then you can transfer those a few at a time and recombine them. If both computers have an ethernet card you can get a special cable to connect them that way or even modify a currently owned ethernet cable.


The specifics about the old compuer I already listed. It comes with a CD-Burner, Floppy drive, external zip drive. The old computer does not have an ethernet card.

The laptop comes with pretty much everything. I think there was even some porn in it, gift from Fry's to the buyer I guess.

Thanks for the help. I didn't give up. I'm still looking for some info.


Posted by Yan on Jan-14-2005 07:40:

Abort, Retry, Fail?


Posted by Spacey Orange on Jan-14-2005 08:38:

quote:
Originally posted by ierxium
What cables?



A cable like this:



The cable has to be a male/male.Staples Link

You can get them cheaper tho in many places in LA. Its easy. Even i did it, and i couldn't point out a switch-box if my life depended on it.


Posted by Yan on Jan-14-2005 09:11:

What about going online with both computers and then sending through AIM or some other program like that?


Posted by DJAntSmith on Jan-14-2005 09:51:

Use a com port connection if available. Then setup a connection via the two.


Posted by Matt Jay on Jan-14-2005 09:56:

Use a network addon card for the laptop.

Or if it has usb ports use a usb flash drive


Posted by DragonsEmerald on Jan-14-2005 11:05:

Just buy a PCI ethernet card for the computer if there's an open slot on the motherboard. They are only $10-15.


Posted by tvmann on Jan-14-2005 18:39:

A cheap & powerful way to transfer files is to get a router that can be used to share a DSL or cablemodem internet connection with up to 4 computers using standard network cables. BTW you actually don't need the internet connection to use one of these boxes which can be bought for $10 - $50. Or get a wireless router for about $75 if you wanna do some wireless networking - they also have 4 wired ports.

Then use XP to set up a home network. It takes a bit of diddling to get this working, but it's very slick when all done. Then you designate some folders, your desktop, or drives as shared on the network, and you can drag and drop files between computers.

I use a wireless router to transfer files every day between my laptop and main desktop computer. And if a friend comes over with a laptop, he can just plug in to the router with a $5 cable and surf the net without any special setup. Some of my friends have wireless routers and I can take my laptop to their places and surf wirelessly as I've got the wi-fi key and am authorized.

Another way to transfer files is with an external USB hard drive or flash ram pocket drive. Very slick and easy to use. Just plug the drive into a USB 2 port (USB 1 might work, but slow) and the drive is auto set up and can be used just like a normal drive. Drag files to it, then plug the drive into another computer with USB, and grab those files.

Another way to move files is with CD or DVD burners. There's software called InCD from Nero that works with rewritable disks (CD-RW, DVD-RW etc) that makes it possible to treat a DVD drive like a hard drive. The write-once disks CD-R, DVD-R, DVD+R etc are cheaper but less flexible but good for backing up stuff like WAV and MP3 files that will not be updated.


Pages (2): [1] 2 »

Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.