Audiophile USB problem - TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- Audiophile USB problem

Posted by OurManFlint on Aug-01-2005 22:52:

Audiophile USB problem

Right, so I decided I want to start rcording mixes, so I buy the M-Audio Audiophile USB as the external soundcard. Everything is working fine about the program. So, I decided to test the output on both my headphones and my speakers(not my computer speakers). All of those components work and the sounds from the outputs are working just fine. I used music from my computer to play on the outputs.

So I decide to go ahead and hook up my mixer to the input. Both the output and input plugs I am using are the analog plug-ins. The input is recieved from the booth output on my mixer (Beringer VMX 300). On my computer, I have both Audacity and Ableton set up as the software for recoding. I played a record on my tables, and I got no sound from my speakers, so I changed the plugs from Booth output to Amp output and still no sound. Then I did it again to tape output and still no sound.

This is where I am stuck. I am not what you call computer savvy, so keep that in mind as well.

So, my queation would be how do i get the sound from my mixer to the Audiophile and from there, how would I set it up to start recording??

Punch and Pie to anyone who helps out.

Posted by sw1 on Aug-02-2005 04:00:

Check your recording properties. You may not have the line input selected or its level is at the bottom, or your main mix is not selected or its level is at the bottom. Depends on your operating system and you hardware utilities. Also make sure the correct recording device is selected.