TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- i need a damn table...omg
i need a damn table...omg
im using two chairs to hold up my subs. then on top of the subs i have my turntables. my amp is on top of some box on the ground. it looks ugly as hell.
where can i find a nice...cheap...high table. I'm 6 foot 2 inches tall.
Option 1: Build one.
Option 2: Ikea.
great DJ table
http://www.fritzproaudio.com/Details.asp?ProdID=231
$116 shipped.
The owner is really cool and shipped it out quickly. They have one thats a little bigger, but the 5422 is 54x22 and holds a 12" mixer and two 1200s.. adjustable height, carpted and looks really neat.
now if only i can build a stand for my CDJ200s.. 
that looks real nice
I would probably suggest building your own.
| quote: |
| Originally posted by Psiweaver I would probably suggest building your own. |
Hey.
Im 6'3".. what I use now is the rack storage shelving. You have to get something semi heavy duty though. They usually come in a box that has 2 half racks that you can combine and make 1 tall rack. I just use the half racks side by side, with a heavy duty particle board laying accross both. Its pretty decent height (not too low) and the solution cost around $40.
i use a big ass computer desk. it fits my TT's, cd decks and mixer perfectly.
go to ikea and buy a base kitchen cabinet. the doors are extra and you dont need them. it also comes with shelves that will fit records.
cost - $50
the cabinet is as high as the countertop in your kitchen is.
then buy a piece of particle board. cut it to the size you want and attach it to the base cabinet. you can even buy a 1 x 4 and attach a lip around it.
paint it all the same color and your done.
total cost is around $70.
i built one this way, but more detailed then i am explaining.
put a 42"x 72"x 1 1/32" board on top of your tv like i did! hahaha...
now my the top of the board where everything is sitting is about 41" off the ground. i love it. bye bye back pain. hehehe.. i'm just 5'6"-5'7" so my turntables and mixer are almost up to my tits. ahem, i mean pecks. *cough, cough*
i'm short, and i can't stand it when the table is just waist high. i don't like doing the "spiderman" when i mix.
must be hell for taller people.
Re: great DJ table
| quote: |
| Originally posted by djshtr http://www.fritzproaudio.com/Details.asp?ProdID=231 $116 shipped. The owner is really cool and shipped it out quickly. They have one thats a little bigger, but the 5422 is 54x22 and holds a 12" mixer and two 1200s.. adjustable height, carpted and looks really neat. now if only i can build a stand for my CDJ200s.. |
well if you mean sturdy in terms of weight, i think it can hold 200lbs.. i wouldn't sit on it, but i'm sure that if i could it will have no problem...
if you mean sturdy in terms of wobble, then it does wabble a bit.. if i'm going crazy scratching, the table does move a little bit, but not enough to cause the record to scratch. As you can see it has 4 independant feet, unlike most computer decks that have a connection between the two rear feet..
I would reccomend building one yourself. I built mine for under $100 and it holds 2 TT's, 2 CDJ's, mixer, monitors, and has shelving underneath to hold about 500 records.
Also, take a look through "Post Pictures Of Your Set-Up" thread. you'll find some great ideas in there.
Re: i need a damn table...omg
| quote: |
| Originally posted by xstalkrx im using two chairs to hold up my subs. then on top of the subs i have my turntables. my amp is on top of some box on the ground. it looks ugly as hell. where can i find a nice...cheap...high table. I'm 6 foot 2 inches tall. |

Re: Re: great DJ table
If you are looking for something better than chairs, go to Staples or Office Depot and get a folding table for $30. Even when you replace it they are still very useful to have around for parties and such.
I use a desk:

| quote: |
| Originally posted by Spirit5 I'm looking for a new table, that one seems interesting. I have this cheap plasticy folding table from KMart that is kind of dented in a little because of my TTs that I had on top of it for two years. Now I have my CDJs that I put on my TTs flight case. Is this table pretty sturdy? |
Re: Re: Re: great DJ table
| quote: |
| Originally posted by Ryan0751 If you are looking for something better than chairs, go to Staples or Office Depot and get a folding table for $30. Even when you replace it they are still very useful to have around for parties and such. I use a desk: |
Re: Re: Re: Re: great DJ table
Studying? I've been out of college for about five years 
| quote: |
| Originally posted by alligator i guess that's where studying stoped for you, once you put your tt's on the table |
Re: Re: Re: Re: Re: great DJ table
| quote: |
| Originally posted by Ryan0751 Studying? I've been out of college for about five years |
Re: Re: Re: Re: Re: Re: great DJ table
Hehe, I DO have another desk for the PC.
| quote: |
| Originally posted by alligator that explains the no need of a desk |
Target sells a table that you would sware was made for decks. Its all black and I think its real world purpose is for a lemonade stand, I'm not sure. Anyways, it costs $20 bucks. It was a little low so I bought several cinder blocks to boost it up to the level where I like to play. Its a quick and easy alternative.
Re: Re: Re: Re: Re: Re: Re: great DJ table
| quote: |
| Originally posted by Ryan0751 Hehe, I DO have another desk for the PC. |
Go to a Staples store, I got a 5' x 2' good, plain, solid, foldout table for ~40 bucks. Free shipping. Holds my amp, 2 tables, mixer, and 2 speakers with room to spare.
Re: Re: Re: great DJ table
| quote: |
Originally posted by Ryan0751 |
Re: Re: Re: Re: great DJ table
I got it at a local home/hardware store here in Boston. They sell that wire shelving in all different dimensions, so I bought one shelf and the "stub" legs. I believe it's 14" deep by about 36" wide. They also sold the piece of melanine that fit the shelf size perfectly.
I had actually bought it to set my center channel speaker on in my living room, but it works great for the CDJ's.
Check: metro.com
| quote: |
| Originally posted by Tegu where did you get that metal stand for the CDJs? how much was it and what are its dimensions? |
Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.