JP8080 Problem - TranceAddict Forums

TranceAddict Forums (www.tranceaddict.com/forums)
- Production Studio
-- JP8080 Problem

Posted by Azza Robinson on Dec-24-2005 09:31:

JP8080 Problem

Hi

Ive just setup my pc and installed my soundcard m audiophile 2496,
Basically ive connected my jp up but i don't have no sound from it i can see the signal in the m audio mixer window just no sound but in the patchbay settings when i click h/w 12 i can hear the jp.

Anybody help?

Posted by Low Profile on Dec-24-2005 13:00:

Ummm... what's there to help with?? that's just exactly how it should work. When you press the HW 1/2 In you're telling the Audiophile to route to audio from hardware inputs 1 and 2 to the outputs so that you can hear the JP... isn't that what you want to do, and isn't that what you have done?

If, however, you want the audio to stream through your computer and into sequencers like Cubase you must set up audio channels in Cubase that accept the hardware inputs and then route the audio back to the monitor mixer of the audiophile. This will give you the same result as selecting H/W In 1/2 in the router, but now Cubase is doing it instead of the Audiophile control panel, and you can add effects to the audio channel in Cubase as well.

Edit: (I have a Delta 44, I thinnk this is similar for the Audiophile) You can also select the Monitor mixer as the input for H/W Out 1/2 in the patchbay/router, and then unmute the H/W In 1/2 channels in the mixer.

Posted by Analog Artisan on Dec-24-2005 14:57:

quote:
Originally posted by Low Profile

Edit: (I have a Delta 44, I thinnk this is similar for the Audiophile) You can also select the Monitor mixer as the input for H/W Out 1/2 in the patchbay/router, and then unmute the H/W In 1/2 channels in the mixer.

Low profile is dead-on...

and if your using FruityLoops leave it on WavOut 1/2 then patch the sound through your sequencers mixer with the IN boxand choose "analog in 1-Delta-AP . this way you wont get a double sound, the M-audio playing it back and a slighty delayed sequencer doing the same as you would with the H/W 1/2.

Posted by Azza Robinson on Dec-24-2005 20:45:

You are both big shiny STARS!!! thanks so much lads!