loooking for a mixer with certain features

TranceAddict Forums (www.tranceaddict.com/forums)
- DJ Booth
-- loooking for a mixer with certain features

Posted by etazbaz on Jan-13-2006 15:53:

loooking for a mixer with certain features

heys guys im looking for a mixer with the following features:
1. level meters
2. channel gains
3. kill switches or -26db 3-channel eq
4. pan capability
5. split cue (perhaps with fader)

Posted by Basstard on Jan-13-2006 17:15:

DJM600

Posted by jmix on Jan-14-2006 08:21:

It doesnt have kill switches, but denon dn-x1500 will cost you less than the djm600, very comparable too

Posted by knoxy5000 on Jan-14-2006 12:17:

Re: loooking for a mixer with certain features

quote:
Originally posted by etazbaz
heys guys im looking for a mixer with the following features:
1. level meters
2. channel gains
3. kill switches or -26db 3-channel eq
4. pan capability
5. split cue (perhaps with fader)

Theres literally tons of mixers that would suit those specifications, Do you have a budget to stick to ?

Posted by Stu Cox on Jan-14-2006 12:50:

Re: loooking for a mixer with certain features

quote:
Originally posted by etazbaz
heys guys im looking for a mixer with the following features:
1. level meters
2. channel gains
3. kill switches or -26db 3-channel eq
4. pan capability
5. split cue (perhaps with fader)

I think the next question is how many channels are you after?

Posted by Orbital32 on Jan-14-2006 16:48:

Denon DN-x1500!! I looooooooooooooooooove mine!

Posted by Trogdor on Jan-15-2006 21:34:

I'm assuming you want individual channel level meters? I can't think of any mixer with pan AND channel level meters. Except for mixers with the pan effect, which kinda sucks.

The best mixer I can think of with pan is the Rane Empath, alas, no individual level meters. On the lower end, the Vestax VMC-180 has pan, but no meters at all.

Pan is a pretty rare feature on high-end mixers.

Posted by djshtr on Jan-15-2006 22:06:

great mixer

1. level meters
2. channel gains
3. kill switches or -26db 3-channel eq
4. pan capability
5. split cue (perhaps with fader)

your best choice is a numark 3002x or 2002x .. i have the 30002.. check it out on numark.com

its a 3ch mixer, 3 channel kill, 3 channel 3eq, has level gains on each, plus a master gain. has pan, booth control, takes 3 line, 3 phono and a mic input.. has efx out if you have an outboard efx processor. has great cuing.. can do split (one to each side), or fade between program--cue, or monitor multiple channels with one ear, and a master with another..

i picked mine up for about $200-300 but i'm sure you can find one for about $100 or so on ebay. I might be selling mine soon to upgrade to xone, so if u want, drop me a pm if you cant find one...

Posted by etazbaz on Jan-16-2006 13:25:

my budget is $500. i dont care if its used. i only need two channels.