YES!!! theyve come!! (ppl please help many questions!)

TranceAddict Forums (www.tranceaddict.com/forums)
- Australia
-- YES!!! theyve come!! (ppl please help many questions!)

Posted by Jah on Apr-22-2002 13:49:

YES!!! theyve come!! (ppl please help many questions!)

YES! i was stressing all day cause i tought they shoudl have come by now but they didnt by the time i left for work! anyway i come home and theres these glroious huge boxes! i just smiled! anyway ive unpacked my mk2s there in used condition but they all seem fine mechanically and all! my question to everyone is 1. how can i check if everything is ok mechanically ice checked with pitch and stuff and its all holding its pitch fine.... also the headshell one one of em is a bit scratched minor i know but is it possible to get a new one and replace it easily!? omg this si so cool right now highlander is cranking in the background!!!!! also i have a pair of ortofon stylus' (currently theres stanton 500s on them) can anyone please tell me how to fit the ortofons i put it on with the pins and all but then i didnt get it and had to abort
anyway the mk2s are here i really dont wanna count my chickens before they hatch or whatever but this is so exciting! please anyone tips on how to check there ok and keep them in good nic! thanx!!!!!

Posted by jeronemango on Apr-22-2002 13:57:

good for u man )) u dont need to worry about them to much,, ive taken mine all over australia and overseas and they still work fine.. look thrashed as but the pitch is still good and arms are fine...

u just got to set the arm height right so u dont dig out ur records and ur needles dont fly off when u scratch.. check on line for that as i dont have my decks out at the moment..

or just post in the dj section

enjoy your mixing )

Posted by Jah on Apr-22-2002 14:55:

yeah thanx dude! im having a bit of trouble adjusting the height and all at the moment
umm also with the ortofon carts when i put them on they sit alot lower so does that mean they would dig into the vinyl more and wear them out? just wondering thanx! cause currently ive put them away until i find out... its like cause the needle is on a donward angle it would push harder against the vinyl then the standard stanton ones
ta!

Posted by Tranceilvania on Apr-23-2002 02:55:

Congratulations Jah on your new decks. Its pretty simple to check them if pitch is ok or not. Simply look at the red dots ligted up by the 50Hz lamp if they appear like stopped on both 33 and 45 RPM area(little fluctuations are expected) then youre ok. The servo circuit on those machines PLL controlled (Phase Lock Loop) so its either right or wrong, no in between. I have better ways of checking them with a 1KHz test record and a frequincy counter but that simple light check should do just fine