TranceAddict Forums (www.tranceaddict.com/forums)
- Production Studio
-- Acoustic Panel Demonstration
Acoustic Panel Demonstration
Gives a nice overview of what they do.
cool vid defo noticed the difference
niccceee
and that is how you don't treat a room for monitoring. Good for a practice room, but all he did was add cheap foam that gets rid of all the high end. The result is a dead room. Not a treated room.
it really isn't rocket science. You need a microphone, test software which is free. Do a grid of your room. Take measurements of each grid. Now you have an idea of how your room sounds at many places.
I knew you would chime in with your captain obvious attitude. The point is to just show the drastic difference. Of course you would use a proper setup as you described if you were treating a room properly.
yeah fuck that bitch l4c
| quote: |
Originally posted by Fledz I knew you would chime in with your captain obvious attitude. The point is to just show the drastic difference. Of course you would use a proper setup as you described if you were treating a room properly. |
| quote: |
Originally posted by Fledz I knew you would chime in with your captain obvious attitude. The point is to just show the drastic difference. Of course you would use a proper setup as you described if you were treating a room properly. |
the thing is that the concept of treatment if so misunderstood. People will spend 500$ on panels with no idea on what the room needs, I've seen so many studio pictures of walls covered with useless 1 inch foam. The thing is that it really isn't that hard. You need a 20 $ mic to take the measurements, the software is free. There are step by step guides.
That foam is useless.
Bulldoze the room and rebuild it again. Slope the ceiling. Make the walls not parallel to one another.
Then you can begin to treat the acoustics.
Powered by: vBulletin
Copyright © 2000-2021, Jelsoft Enterprises Ltd.