þá÷ï???

___________________
àöòîé

quote:

Originally posted by Prism þá÷ï???

I take it as a 'yes'

___________________
Proud member of the "Filthy Zionist" coalition

If I agree with you how much money do I get in return?

___________________
Please join the trancEaddict members Audioscrobbler/Last.FM group! (Click)

Count me in

But here in Holland the Cd's are getting better priced, I bought the new Remy cd BANG ! For only 12,- Euro's that's about $10,-

___________________
Favorite producer atm:
Joris Voorn
Favorite DJs atm:
James Holden & Benny Rodrigues

thats an interesting idea...lemme just kinda run down the basics for product liability for ya guys since i know a little bit about it...

negligence

A tort related to defective products where the defendant has beached a duty of care and caused harm to the plaintiff.

(note: failure to exercise due care includes failing to assemble the product carefully, negligent product design, negligent inspection or testing of the product, negligent packaging, failure to warn of the dangerous propensities of the product, and such)

Chain Of Distribtution

All manufacturers, distributors, wholesalers, retailers, lessors, and subcomponent manufacturers involved in a transaction.

(note: All parties in the chain of distribution of a defective product are strictly liable for the injuries caused by that product. Thus, all manufacturers, distributors, wholesalers, retailers, lessors, and subconponent manufacturers may be sued under this doctrine.

Defect

Something wrong, inadequate, or improper in manufacture, design, packaging, warning, or safety measures of a product.

Defect In Manufacture

A defect that occurs when the manufacture fails to:

1). Properly assemble a product
2). Properly test a product
3). Adequately check the quality of the product

Defect In Design

A Defect taht occurs when a prodcut is improperly designed.

there is always more but that would be a good start hehehe....hope that helps...down with RIAA!!

Actually last night I was playing my out there and back cd skipped and i was pissed. So I used this repair kit that i bought and that did not fix it, so I used the time tested (USE THIS METHOD AT OWN DISCRETION NO LIABILITY SHALL BE CONTAINED FOR THE ADVICE), find the scratch and put toothpaste on the scratch then grab a q-tip and and rub it in, then wash it out with water and sorta get the toothpaste off. Should work or the scratch is far too deep but it worked for my cd .

quote:

Originally posted by torontotrance Actually last night I was playing my out there and back cd skipped and i was pissed. So I used this repair kit that i bought and that did not fix it, so I used the time tested (USE THIS METHOD AT OWN DISCRETION NO LIABILITY SHALL BE CONTAINED FOR THE ADVICE), find the scratch and put toothpaste on the scratch then grab a q-tip and and rub it in, then wash it out with water and sorta get the toothpaste off. Should work or the scratch is far too deep but it worked for my cd .

bastard...i tried that toothpaste thing and it made things worse hehehe...

its so true. being a cd collector, ive seen every sorta cd there is i reckon. if you look at cds in the mid nineties (i.e. hooj cds) you cna see the pressings alot clearer thatn you could from say 2000. and of course in the last year hooj have just been using cdrs, not even pressed.

surely it cant cost that much more?!

___________________

quote:

bastard...i tried that toothpaste thing and it made things worse hehehe...

it works...if done correctly and the scratch is not too deep.

The problem is that the vulnerable side of your CD now is the top side! it is the side that houses the label. By the way - the CD that started to skip was OUT THERE AND BACK!!! coincidence???? I think not!

Seriously, though - take a look at some of the older CD's you have - the scratches could be found on the bottom only - top you didn't have to worry about because it was plastic. Now, the top of the CD is the actual foil with some compound that is used to print the label but there's no plastic coat on top!

Example: (let's try ASCII):


Old CD: (exploded side view)

============== <-- top plastic coat
______________ <-- foil with grooves (the part that laser reads)

============== <-- bottom plastic coat (most prone to scratches)


New CD: (exploded side view)

______________ <-- foil/label compound without coating

============== <-- bottom plastic coat

Grab any old CD - circa 97-98 or older and take a new one 2001 and up and you will see that they are missing the top coat. Now, your CD is vulnerable from the top because there's no coating on the foil that contains the "peaks and valleys" that the laser in your CD player reads to reproduce the sound.

So, if your CD is scratched at the top - now you are S.O.L, as you cannot repair that by any means. If you leave it sitting around on your desk on a spindle and some time later pile up CDs, they may scratch each other if hard dust particles or grime/sand fall.

hope this helps......

___________________
Proud member of the "Filthy Zionist" coalition

quote:

Originally posted by torontotrance it works...if done correctly and the scratch is not too deep.

You are better off using Brasso as the abrasives are much finer and polish better. DO NOT use abrasives on the Coated side of the disc. if you cut through the Aluminium coating you're done!

Phil