I had the same reaction when I bought it a few years ago ... just recently; I never knew this stuff can be used for “Rust Prevention and Protection” for the car.

Jig-A-Loo is a silicone-based lubricant and water-repellent spray. Manufacturer claims that it contains no oil, grease, wax, petroleum distillates or detergent and that it doesn't stain or smell after application. It is indicated for use on wood, metal, glass, rubber, leather, fabrics and most plastics. [1] It has been used in the commercial and industrial sectors in Canada since 1958, and was launched in 1998 to the Canadian mass retail market, and globally in 2007.


Jig-A-Loo contains silicone, 30-60% methylene chloride and 10-30% perchloroethylene[2] Methylene chloride is the active ingredient in many paint strippers and perchloroethylene is the most common dry cleaning fluid. They are both aggressive and toxic chlorinated solvents. Although the manufacturer emphasizes the lack of petroleum distillates, these chlorinated solvents are more toxic than the petroleum solvent heptane, which is commonly used as solvent for US market silicone lubricants. OSHA allows much lower permissible exposure level for these chlorinated solvents compared to heptane.

100PPM TWA Tetrachloroethylene
25PPM TWA Methylene Chloride
For comparison permissible exposure level of heptane is much higher at 500PPM TWA [3]


TWA is an 8 hour time weighed average exposure level deemed to be safe by US OSHA. [4]

For environmental and health safety reasons, the State of California will ban the use of perchloroethylene and methylene chloride in multi-purpose lubricants such as Jig-A-Loo effective Dec 31, 2010 and the sale of remaining inventory will be banned effective Dec 31, 2013[5]

Last edited by E2EK1EL on Jun-05-2009 at 18:03

that commercial is amazing!

___________________

nightdreamer

lubricants

___________________

Short time TA, Long time Guver, Good time giver.

Jig-a-lisaloo?