I have a firewire 410, novation remote sl 37 and cubase 4.0 and I am trying to set all of these up. Currently I am having a problem getting sound when I use the keyboard. When I hit the keys on the keyboard, I get movement from the red meter showing that it is being received, but there is no sound. Also, I am able to use the play, stop, etc buttons on the keyboard and they link up fine. When I hit play I am able to hear the metronome through the speakers so I believe the soundcard is set up correctly. The steps I've taken to set up the midi instrument are as follows:

F11 to get a midi instrument
choose the VST instrument
assign all midi inputs and the output to the vst

when I do this, a blue meter on the mixer lights up, but there is no sound. It's as if the mixer isn't routed to the speakers, but I am not sure how to fix that.

Hopefully someone can help thanks.

this is a bug in the h20 version. you probably better buy it.

___________________

quote:

Originally posted by DJ Robby Rox I've never had a problem with FLs tech support till this day. (I've actually never used it till this day)

quote:

Originally posted by floyd741 i think echosystm is a pretty cool guy. eh pwns robby rox and doesn't afraid of anything.

Have you armed the record button on he vst?

___________________
*** Sig edited -> no banner advertising in sigs
http://promote.beatport.com/images/labels/1253/12531-blue-468_60.jpg

have you hit f4 and set the outputs

___________________


https://soundcloud.com/ghostea stuff

echo - I did buy cubase. I looked through the manual but couldn't find anything that targeted this problem.

ry - I hit both the record button and monitor button, but it didn't work.

myst - I will have to check this.

thanks for the replies.

That red button has to be highlighted, also make sure u use midi channel 1 as some Instruments only works on that channel by default.

quote:

Originally posted by trancypantzzz assign all midi inputs and the output to the vst

Only assign the MIDI Output to the VST, and set MIDI In to all inputs.

___________________


http://soundcloud.com/subtara

quote:

Originally posted by trancypantzzz echo - I did buy cubase. I looked through the manual but couldn't find anything that targeted this problem.

i was joking.

i'm just suprised someone is actually using a non-cracked version of sx3 still.

___________________

quote:

Originally posted by DJ Robby Rox I've never had a problem with FLs tech support till this day. (I've actually never used it till this day)

quote:

Originally posted by floyd741 i think echosystm is a pretty cool guy. eh pwns robby rox and doesn't afraid of anything.

he is using cubase 4

Ok so I opened up cubase and started an empty project. I pressed F11 to setup a VST. It asked me to make a midi track and I clicked yes. My setup looks like that screenshot above. I have the monologue loaded with input setting set to ALL MIDI INPUTS and output setting set to the MONOLOGUE VST. I have the red button pushed as well as the monitor button. The channel is set to 1.

When I hit F4 and go into the audio settings. My output settings are Stereo out > M-AUDIO FIREWIRE ASIO > FW 410 ANALOG OUT 1/2 R & L. When I go into the device setup and go to VST Audio System my settings are as follows. M-AUDIO FW ASIO with Analog out 1/2 R & L as the only 2 active outputs. In the VST system link menu I have active checked, ASIO Input is set to not connected and ASIO Output is set to FW 410 ANALOG OUT 1/2 R.

When I hit the keys on the keyboard I get a blue meter in the mixer as well as the MIDI fader, but I guess this just means that the signal is going through.

Did you plug in the midi and then start C4 or vice versa?

___________________
Like Progressive and Deep House? Grab my latest mix below
http://www.tranceaddict.com/forums/...s=#.UAv1rbRo3h4

I had the controller plugged in and then I turned on the computer. Then I opened cubase. Then I just unplugged the keyboard and plugged it in and I could still use the play and stop buttons, but the keys weren't recognized. Lastly when I opened cubase and then plugged in the keyboard, the keyboard wouldn't work at all.

Yea that's what I mean, often a midi keyboard has to be plugged in and recognised by the OS before you start your sequencer (make sure you don't unplug it once it is). If you did that and it still isn't working then I don't know, could be a driver issue or maybe the keys are busted. Can you try it in another sequencer?

___________________
Like Progressive and Deep House? Grab my latest mix below
http://www.tranceaddict.com/forums/...s=#.UAv1rbRo3h4