and I want to be able to include it in the track I am working on at the mo. I haven;t got a clue what makes it, but I love it and I need it and I'm positive one of you talented people will know how to do it. Heres the wooouuur sound in question.


Thx very much.

PC

___________________
Trance is our religion and Armin is our god!

Last edited by paulc_dj on Nov-05-2005 at 04:56

it's a pretty fatty synth with a relatively high attack and a good amount of release. alternatively, i guess you could just use volume adjustments (fade in, fade out) and apply them to a sample. i recommend using a vst because a lot of vstis are capable of making a similar sound under the right effects.

___________________
@_@

thats not a whoomph sound

thats a wooouuur sound

___________________
check out my tunes and my mixes on soundcloud
my released tunes

Hey. This is a bit of a secret in production but I'm not a magician so fuck it lol. To get that sound, pick a drum sample out, nothing imparticular but each sample will give a different feel to the growl. Next, you need to fill a measure with a whole note. After that, chop it or quantize it (depending on your host) to 64th or 128th notes. Finally, to get the full growl sound, you need to vary the pitch from +100 cents to -100 cents or scale it to your liking. If you have FLS5, watch for my ALLFRUIT vol2 demo because I'm doing a lot with such sounds .

Cheers,
Zac

___________________
DarkSword - Turn On
DarkSword - Hell Bound
DarkSword - Fresh
DarkSword - Styled
DarkSword - Shadowed Sun
DarkSword - Turning Forward
DarkSword - ALLFRUIT
Pacific Mint vs DarkSword - Climax Zone 2005
SoundClick Page

---FL Studio 9 User---

i think it's a saw with a reverse reverb on it.

___________________
Reason 4 | Behringer 2030A | E-MU 0404 | Sennheiser HD 555 | Behringer Xenyx 802

I think it's not really hard to create a similar sound.

All you'd need to do is select a saw oscillator (or more and detune them a bit from each other), place the sustain for the volume ADSR to the max, and the attack of the filter ADSR to say 32 or 64 steps. Play with the filter frequency amount until you hear the sample go from very low freqencies only to full pass.

You'll have to set the sample just right though, so that it is in tune with your other instruments.

Hope this helps

___________________
Icone / Van Gelder / Blue Manta / The Elemental

Icone Home
Icone Store -> New Percussion SAMPLE CD here!
Icone MySpace

I believe its a fat saw (a couple detuned saws) with a little bit of resonnance and distortion. The cutoff point goes from low to high so you can hear the lightly distorted resonance, giving the sweep effect.

quote:

Originally posted by IDarkISwordI Hey. This is a bit of a secret in production but I'm not a magician so fuck it lol. To get that sound, pick a drum sample out, nothing imparticular but each sample will give a different feel to the growl. Next, you need to fill a measure with a whole note. After that, chop it or quantize it (depending on your host) to 64th or 128th notes. Finally, to get the full growl sound, you need to vary the pitch from +100 cents to -100 cents or scale it to your liking. If you have FLS5, watch for my ALLFRUIT vol2 demo because I'm doing a lot with such sounds . Cheers, Zac

this is the easiest way I think

___________________
Pleas help me to ID this tracks:ID1 ID 2

funny, it just sounds like a slow-attack filter on a saw/pwm...

___________________
-~-

you know thats exactly what i thought, its sounds totally basic to me, why is everyone writing long explaintions?!?

it

is

a

filter

WOOOUUUURR!

___________________
check out my tunes and my mixes on soundcloud
my released tunes

yeah jsut a filter with reso+distortion

So what would be the best VSTi to make that sound on? I use Vanguard, Atmosphere, V-Station, Z3ta and loads more.

___________________
Trance is our religion and Armin is our god!