I know dance music is really over compressed, but that just sounds ridiculous.

___________________
I've never been able to eat a whole baby.
Kill the women. Eat the children.
It's just one of those days where you want to bend over everyone you know and kiss their ass goodbye with a big sideways boot.

Latest Mix

You can put one on the master channel, but putting it on before you start to mix is stupid. You need to know how your track sounds before compression in order to figure out how much compression it will need, right?

I have to say I've read more retarded "advice" and misconceptions about compression than about any other production tool.

quote:

Originally posted by MrJiveBoJingles I have to say I've read more retarded "advice" and misconceptions about compression than about any other production tool.

You are totally right. The irony is that the compressor really isn't that complex of an effect.

I think people really try to make it more than what it is which is the reason for it being used so much and also the reason why there is so much ignorance related to it.

Is it an important effect and aspect of EDM? Of course. But it's way over used and abused.

Things like exciters need to get more attention. Those things can brighten up certain aspects of music more than a compressor by far.

___________________
Please send your demos to [email protected]
For more information, please visit www.myspace.com/olympikrecords

I think i know what this is about. in rare circumstances, some mix engineers have a "chain" on the master that they have defined and perfected over the years, that they like to use for specific results. Generally this is for a tried and tested project where the mix engineer wants to achieve a specific result. I've worked with people doing it for film score mixing of orchestral cues but that's usually when they know the exact sound they are trying to achieve and are already familiar with the recorded material.

it's not really applicable in general terms as it's done for one result in a specific way, by people who really know what they're doing (by this I mean the guys that are the best in the world). For edm which is compressed to within an inch of it's life anyway, it would just be overkill and bad practise as most people get in wrong, so getting it wrong on the master is a good way to ruin an entire track.

Anyone advising this for edm is not giving good advice.

maybe he means a limiter?

___________________
www.misterfalconmusic.com

There is absolutely nothing you can gain from this approach that you wouldn't also gain from doing the best possible mix and compressing afterward.

Don't do it. Don't use a limiter either. You need to pay attention to your levels and keep them as flat as possible without a compressor; that way you can squeeze every last decibel out when it's time to master.

___________________
My party schedule:
2009-02-21 - DJ Attention @ I'm So Popular
2009-06-18 - DJ Annoying @ People Need To Know Where I'll Be
2012-11-32 - DJ Insufferable ɸ Or At Least the Stalkers I Complain About
2048-06-66 - Spastic & Whocares ¶ Although I'm Actually Flattered
9999-45-81 - Tweaker Gimp ☼ I Probably Won't Even Go To This But I Have To Make Sure I Fill Up All The Available Space Here

A mix bus compressor can help in the mixing process and make the mix pump a bit more and gel together. But you want to put it on after you have your Kick/snare and Bassline mix decently placed in the mix. The kick is what will trigger the threshold on the compressor the most. Slapping a compressor on the mix before setting the kick mix levels wont let you properly mix everything else. I know a lot of dance music producers use a mix bus compressor, mostly the advanced producers who can get their mix to a point that minimal mastering work is needed afterwords.

In the past i've used them, minimally with -1 or -2db reduction, with a small ratio between 1:00-2:00. This is mainly to help control the highest energy spikes in the tracks that are busy. Having talked to Deepchild (producer of 'No Disgrace') extensively about this, generally mastering houses don't want any sort of mix bus compression on the mix when you hand it in. They'd rather have the -10db to -18db headroom to work with and do the compression themselves. Someone like Maestro Robert Babicz will promptly backhand you and ask to resend him an uncompressed mix.

If you think about it, it actually serves no purpose if your mixing with -10 to -18db of headroom in mind on a floating point system. The only other time serious mix bus compression might be useful, is if you don't plan to have the track mastered, and aim to push the individual channels really hot and then limit them with a mix bus compressor, for bedroom/small club playing out or demo purposes.

___________________
_____________________________________
commercial and underground electronic music (house/techno/trance/other) will surpass today's hip hop/pop/rock/country in worldwide interest...if it has'nt already.

Last edited by Kismet7 on Feb-11-2009 at 02:17

there are usually no real rights and wrongs when it comes to music but god damn, this is as close to 100% wrong you can get.

trying to master a track before mixing it is like wiping your ass before taking a shite...
You can do it and no one will stop you but...seriously, what's the point?

___________________

quote:

Originally posted by davedresden i suggest getting the gabriel & dresden prog-a-minute. in 3 easy steps you too could change the face of dance music. batteries not included. - dave

quote:

Originally posted by Vizay there are usually no real rights and wrongs when it comes to music but god damn, this is as close to 100% wrong you can get. trying to master a track before mixing it is like wiping your ass before taking a shite... You can do it and no one will stop you but...seriously, what's the point?

Quote who your talking to, because no one said to master a track before mixing, not even the OP.

___________________
_____________________________________
commercial and underground electronic music (house/techno/trance/other) will surpass today's hip hop/pop/rock/country in worldwide interest...if it has'nt already.

quote:

Originally posted by vikernes Electronica/dance music is typically more compressed than say rock or something, so maybe putting a comp before starting out a track is a good idea?

It seems that it would depend on what genre of rock you're talking about - some rock songs are amazingly crushed, with zero dynamics remaining. It's very impressive from an engineering standpoint, getting it that loud without audible distortion, but from a listening standpoint I can listen for about a minute before losing interest. It doesn't get quieter, it doesn't get louder, it just stays exactly where it is, from start to finish.

In terms of the original question - some great sounding songs and albums have been made using master bus compression (for example, on SSL mixing desks, which allegedly have a distinctive sound - I can't comment, I've never owned/ used one). Some experienced engineers have no problems working with the compression on, since they have 20, 30 years of experience working that way.

If you don't have that level of experience, then be advised that a compressor on the master channel can produce some absolutely horrible results if used incorrectly.

If you're going to try it out, set the compressor's output level so that the overall level is the same as without the compressor. Most people will listen to two examples of the same piece and perceive the louder version as better. So if you set the compressor's output so that it's not actually louder, just more compressed, then do your comparison on those terms, you'll be able to better judge if the compression is having a detrimental effect on your sound quality.

If it sounds fine, turn the compressor's level back up to where you want it.

One last word of advice, from my experience - a well balanced mix, with a good set of sounds that fit together well, with appropriate levels used, will result in a much louder mix than a poorly balanced mix with heaps of compression and limiting applied in an attempt to quick-fix the bad mix and try to get it loud.

quote:

Originally posted by derail So if you set the compressor's output so that it's not actually louder, just more compressed, then do your comparison on those terms, you'll be able to better judge if the compression is having a detrimental effect on your sound quality.

Compression makes it sound louder even if the height of the peaks are the same. The subjective perception of loudness is mostly based on average level, not peaks. That's the point of compression after all -- same peak level (0dB) in the final product, but higher average level.