where do they plug into?

mine plugs into the BNC? outlet on the top of my mixer . . . some mixers have an outlet for them and some don't.

The input is better known as the microphone input. It has three holes on the bottom inside of a female O plug

___________________
When you dance, the DJ takes you on a journey, but he or she is usually not the focus of your experience at a club or festival or wherever you hear the music. Dancing is. Music is.

Depends, there are two connections : the XLR input like Flesch says, and the BNC connector like opianstate says (that one is coaxial, same connector as on older Ethernet cards).

But a lot of mixers don't have a dedicated light connection at all, so if that's the case, you'll need a lamp with an external PSU.

So thats where it goes lol

___________________
b-13photography
CTA #43 DJ Spiel

quote:

Originally posted by m. sylvia No one leaves Sound-Bar sober on my watch.

so for the mic input for my pioneer djm-500 mixer what kind of lamp coudl i use? or what would i be looking for as far as out of the lamp?

___________________
dj Lam.com

Don't mistake the lamp connection with a mic connection. They can both have the same connection (XLR) but it doesn't mean that you can plug the lamp in the microphone input.

As far as I remember the DJM500 has no dedicated lamp connection, so you'll have to find a lamp with external PSU.