aleop, they are phono jacks

to rip you need to find a way to connect you stereo + soundcard, its a lot easier having a mixer the end cable that goes in to the soundcard must be a stereo jack, like on the end of headphone cables, the smaller jack variety

the best way for you to rip is either to find a line out or phono/aux out of your stereo and get a phono to stereo jack cable to connect to the line in on your soundcard

there is also another way, you can connect the headphone socket to the line in on your soundcard by stereo jack to stereo jack, just make sure u get the large/small adapters

also u will need a recording program, i suggest audiograbber which is freeware and can be downloaded from www.download.com

happy ripping

___________________

w: www.luketerry.com

depending what kind of turntable you have, you might need to worry about grounding. if it is a dj table, then most likely you are going to need to ground it before you can rip the vinyl. if it is a regular home stereo table, then you *might* be in luck and not have to ground the wires. either way, a turntable jack is pre-amplified or something like that, that is why your cd player sounds like shit when you plug it to the phono input on a home stereo.

so, basicallly, you are going to need some piece of equipment to sit in between your turntable, either a mixer, or a home-stereo reciever w/ a phono input on it

If you don't have a mixer, but do have a spare USB socket you could buy Steinberg Clean Plus which has the necessary phono preamp. And it has some de-noising facilities too

Basically, vinyl turntables output a very low volume signal compared to many other audio devices (CD, radio etc.) This means that, before you can record it you need to amplify the incoming signal. Because this extra amplification is done directly on the vinyl sound (and before the main amplifier) it is known as the phono-preamp stage. Don't consider recording vinyl without a phono-preamp between the turntable and your recording device!

Try asking Radio Shack.. or those places they deal with electronical stuff.. that you don't have a mixer but want to record your vinyl to CD for backup purposes....


my best guess

___________________

Cause back before '99, U didn' give a damn about PvD, but now that he's pressin' platinum LP's, all of a sudden ur' into
his killer beat's! Ain't nothin' U can do to make it stop cause trance makes the world go round, so cut the act...

[My Website]

Thanks everybody for the responses.

quote:

Originally posted by TranceInMySoul If you don't have a mixer, but do have a spare USB socket you could buy Steinberg Clean Plus which has the necessary phono preamp. And it has some de-noising facilities too

This looks relatively promising and somewhat simple compared to what else I hear about ripping vinyls.
Cheers.

Here's another one for you:



unfortunately, i cannot link to the exact page, because their site sucks.

but, it's under products, accessories

http://www.terratec.net/ttus/

___________________

Visit my site Antiwar Homepage

Yes u can.

OK, I just bought the Steinberg Clean Plus software and hardware and I've managed to get sound through and everything is recording just fine but unfortunately the sound quality coming through is like the equivalent to an 8 KPS MP3 regardless of how I try to clean it with the software.

Where I think the problem lies is that I connected the line to the Microphone input on the back of my PC which is the only line input I can find on my PC. Should there be one on the sound card on the inside of the PC?

Sorry if this all sounds a bit dumb, I'm a complete newbie to this kinda stuff.

Please ignore the first post in this thread as that's all fulfilled.

If you had STR8-100's you could rip shit without any hassles they have a direct digital output on them.

___________________
tech-house
n. an old-school term for crack cocaine.
"Got some tech-house?" "Yeah, I'm your man for tech-house, Grandma."
http://thesurrealist.co.uk/slang.cgi?ref=tech-house

I managed to get it solved.

Big thanks to everybody who helped me in this thread. As it's fulfiled, I shall now close it.