whats up guys. I got a gig coming up that i need to record the set for. I was curious as to what equipment i need to do that with. And how i would set it up. I'm thinking a mini disc, but anyone got an idea?

MD recorder with an RCA to 3mm headphone cable does the job for me very nicely.

minidisk is the easiest way + also has poor sound quality, but if you have a decent laptop u could record using that and stick a mic on the front of the dj booth or somewhere so u can get the 'live' sound with crowd reaction too, either record both of em at once in one file or record each in separately and join them in soundforge.

___________________

w: www.luketerry.com

If you use a mic, you will get the atmosphere on tape too. Even though the sound looses a bit quality when recorded with mic, i think it is kind of cooler with all that crowd and stuff in the backgorund.

quote:

if you have a decent laptop u could record using that and stick a mic on the front of the dj booth or somewhere so u can get the 'live' sound with crowd reaction too, either record both of em at once in one file or record each in separately and join them in soundforge.

this is the way to go, best quality, sounds the coolest for sure

___________________
| Download LIVE WNUR 89.3fm Set | bio

ok, i dont have a laptop. So minidisc then? and what port do i plug it into on the mixer?

minidisc or dat recorder...

either should work.

___________________
[ ALL THIS B!TCHIN` IS MAKIN` ME SKRATCH! ]

ok, now how do i set that up to a mixer

___________________
www.djerniep.com

if you dont already have one, get an RCA to 1/8inch jack cord
plug the two RCA's into your "recording" output or "tape" output, since your Master outs and Booth outs will probably be in use. Run the 1/8inch jack (the same as whats on your headphones, not the big one that goes into your mixer before your headphones, thats 1/4inch) into your Line Input on your MD player

make sure your levels arent too high or too low on your tape/recording output

also, since RCA is unbalanced (no ground) it will act as an antenna and pick up stray electromagnetic interference ... so try and keep the cord away from other cords and equipment as best you can



on another note, check out the mix I uploaded to your FTP
Jordan Ashkenazy - 09-29-03

Make sure you have a fresh battery for your MD.

Oh and my MD recorder has MIC input as well as Line In. Reckon i could use that to get the crowd/atmospheric noises? Would there be heaps of reverb???

___________________
Upfront Records