amd athlon xp2000+

clock speed of abt 1.7 ghz right? or not as im only getting 1250mhz out of mine...

___________________


Found Atlantis - Mixography [mix archive/mokumentary/my soul]?
i writed a song.

Not really sure... my 2800+ runs at 2073MHz by default.

___________________
Latest releases:
Endless Cycles [Capital Heaven]
The Charlatan [Morphosis]

im gunna give this another go and overclock this bastard in BIOS

___________________


Found Atlantis - Mixography [mix archive/mokumentary/my soul]?
i writed a song.

nope

it didnt like being overclocked

system didnt boot up, when it did, i got a FAT error, some corruption in the MBR and well...caused a format as my hard drive was just being queer, showed up as negative space and well...it wasted a good 2 hours of my life...fucking thing.

___________________


Found Atlantis - Mixography [mix archive/mokumentary/my soul]?
i writed a song.

I think my 1900 only runs at 1.4.

last time I checked was a long time ago though, but I am pretty sure that is the number.

1800+ is 1533Mhz.
2000 shoulb be 17 and change.

http://www.pro.ro/distrib/amd.htm

check it, says 2000+ should be at 1.66, and I was wrong on the estimate of mine. eh.

my is happy at 2205 from a 1.47 (1700+)

My 3000+ XP is 2.147Ghz stock...

Course the clock speed has nothing to do with actual computational speed, at least not anymore.

quote:

Originally posted by KilldaDJ amd athlon xp2000+ clock speed of abt 1.7 ghz right? or not as im only getting 1250mhz out of mine...

Sounds to me like your FSB speed is set too low. Let's say your FSB was set to 200 MHz to get that 1250 MHz, that gives a multiplier of 6.25 and if your FSB was set properly at 266 MHz then you'd have a 1663 MHz processor running speed.

What you probably don't want to do is change the multiplier. However, if the FSB speed is set lower than it should be, you can safely raise that to whatever your motherboard will support (if your motherboard doesn't support high enough FSB speeds, that may be part of the problem as well).

Hope that helps.

___________________
My party schedule:
2009-02-21 - DJ Attention @ I'm So Popular
2009-06-18 - DJ Annoying @ People Need To Know Where I'll Be
2012-11-32 - DJ Insufferable ɸ Or At Least the Stalkers I Complain About
2048-06-66 - Spastic & Whocares ¶ Although I'm Actually Flattered
9999-45-81 - Tweaker Gimp ☼ I Probably Won't Even Go To This But I Have To Make Sure I Fill Up All The Available Space Here

u sure u got a 2000+ shit ur pros sucks if its only goin 1250
I got 1800+ thats 1.53
My dads got a 2100+ which is about 1.79

___________________

quote:

Originally posted by DigiNut Sounds to me like your FSB speed is set too low. Let's say your FSB was set to 200 MHz to get that 1250 MHz, that gives a multiplier of 6.25 and if your FSB was set properly at 266 MHz then you'd have a 1663 MHz processor running speed. What you probably don't want to do is change the multiplier. However, if the FSB speed is set lower than it should be, you can safely raise that to whatever your motherboard will support (if your motherboard doesn't support high enough FSB speeds, that may be part of the problem as well). Hope that helps.

yeah, i don't quite remember, but i think my XP2800 is set to 133FSB / 15x multiplier, which yields the default 2GHz

search www.groups.google.com for "athlon 2000 fsb setting" or something like that

___________________