|
| quote: | Originally posted by tu_face
wrong. why the hell would you attatch an fx unit to a mic input..?? and the efx500 SOUNDS AS GOOD AS THE INPUT. so wired correctly to an allen + heatjh, it will sound fantastic, and way better than a djm600.
chesco, either:
wire it from the output on your mixer into the input on the efx500, then output on efx500 >stereo/amp.
or, if the xone92 has effect send & return jacks, take the send from the mixer to the input of the efx500, and the output of the efx500 to the return pon the mixer. with send/return it doesnt sound as good, but you can use it on individual channels as opposed to just the master signal.
i just wire it from the main output straight to the efx, then to my amp. it sounds fantastic.
make sure you don't use a clean feed output though (they are labelled as such on a+h mixers)
hope this helps |
Look mate, with all due respect, its my fuckin mixer and the mic channel also doubles as the Rtn. So dont try and tell me stuff I already know.
And as for plugging it straight into the master output, well thats fine if you want to loose the sound quality from the mixer..
___________________
DJ GIOVANNI FERRI
COLOURS EVENTS!
LATEST TRACK COMING ON IN MOTION RECORDS
|