I have a similar probleme with my table.

At 0% the center dots are very static they don't move at all.

THen it should be either -3.3% or 3.3% that the other row of dots right over the big one should be statics, they are statics at about 4 even 4.5 ( -4 or -4.5 )

And the last one is the upper row of dots at 6% well it more static at like 7%

How come the zero is okay but not the rest ??

And how do you fix that not that it anoying just that I'd like to know if it get any worse.

Okay. there is actually an internal adjustment for this. How to do it is at: http://music.hyperreal.org/dj/sl1200.html

maybe that will help

___________________
Helping girls make bad decisions since 1979

bah, this is pissing me off. at 0%, they sound like they're at +2.5%

betwen 0 and +4%, i don't hear much of a diff., but between 4% and 4.5% i hear a lot.

___________________
check out my guest mix for OndaSonora Podcast (aug.2009)

There is a way to solve that problem. I'm not sure about this, but if you turn over your SL1200, you should see a tiny screw with an arrow in 2 directions and + and - above it. That's the pitch correction screw. You feel the pitch is calibrated wrong upwards, you should take a screwdriver and turn the screw to the - side. Turn your TT around again and check if it's better now. Keep doing that untill you get the desired effect.

I'm not sure about the position of that screw on the SL1200, but it should be there. If it isn't, take a good look at your TT to see where it is located.

Hope I helped you solve your problem!

___________________

quote:

Originally posted by Push2005 Ik ben net terug begonnen met cassettes op te kopen... Die pitchcontrol is echt ongelofelijk !