there is no difference that i can tell of between the pitch control on a mk5 and a m5g, apart from the little button that wacks it up to +/-16%

___________________
MUGGETS

Hey RIP_Technics... What is your new user name going to be?

___________________
www.myspace.com/joepapeo

i new some1 was gonna bring that up lmao!

damn not exactly lookin forward to bein a tranceaddict in trainin again

o and thnx for the feedback regardin the pitch on the Gs!

ordered em and FS2 - cant wait!

if you ask swamper nicely he will change your username for you

___________________
MUGGETS

quote:

Originally posted by tu_face if you ask swamper nicely he will change your username for you

Maybe it should be Technics_The_Resurrection

___________________
www.myspace.com/joepapeo

or RIP_Numark

___________________
MUGGETS

ok let me get this straight.

I myself have tt500 decks which is probably the same thing as the ttx.
If I went over to a friend's house and say span a set for the first time on the mk2's it would be harder? cause i'm not used to the decks?

Could someone explain this.

its to do with the torque and the weighting of the turntable. some decks have very little torque (gemini xl's). because they have less torque they behave differently when you rest your finger on the platter or queue off the record. decks with low torque tend not to queue off at the correct speed instantly. they kind of accelerate up. if you get used to the way low torque decks behave, moving onto something like 1200s is kind of weird cuz those decks are powerful - really high torque. i noticed that i couldnt rest my finger on the platter to slow it down like i could on geminis, it had practically no effect on 1200s. i had to press/touch on the platter till there was an audible dip in pitch to get any substantial change. likewise speeding it up was different to how i would on geminis. i still havent gotten the hang of 1200s cuz i dont get to play on them with any frequency. im just used to the weighting of low torque decks. once you feel 1200s out for yourself and get used to how they behave ive heard they are really good cuz they stay on the correct speed and when you queue the record off it goes straight in, it doesnt accelerate up.

for me it was quite the opposite. using 1210s for the first time they felt like belt drives because i was so used to the torque on the TTX1s (3.8 compard to 1.5 on the techs)

i found it hard to do corrections with my hands because i wuld either put too much weight on the platter causing it stop or push the platter to hard causing the beats to go even more outta sync. im gonna be startin a weekly warmup gig in a pretty good club soon. got the job by throwin in a mix CD (made with TTX1s.) I can still mix compitantly on Techs but im not as relaxed as i was on my own. only solution was to get confident at using technics. so i bought a pair.. pretty expensive confidence building exercise!


oh btw this is RIP_Technics

___________________
...I'll be back for breakfast

All pitch faders on Technics decks are identical.

___________________
Gear Specialist

quote:

Originally posted by DjVash All pitch faders on Technics decks are identical.

wrong. anything prior to the m3d has the zero point click.

___________________
Helping girls make bad decisions since 1979