man... i need some help here... i am having a bad static problem on the pulser remix of synaesthesia on the first break where that sweet melody comes in...its like a tidal wave of crackling... and this is a brand new vinyl... how do i fix this?

or can i?

Sorry man but from the sounds of it, if its only happening in the one location, its not your needles or decks or anything, it is the actual record, and if so, I don't think anything can be done unless its just some dirt or something, I take it you tried cleaning it, if not, some compressed air should do a good job, works for me now and then.

what about that groove glide stuff?

i have not tried that

quote:

Originally posted by fr3sh what about that groove glide stuff? i have not tried that

I haven't tried it either, so can't tell ya about it.

so this compressed air... do you use the one you buy in a bottle... or one of those industrial ones at low psi... the reason why i ask is i want to know roughly how much pressure i should be using to 'clean' out the vinyl... that static sound is so annoying!!!

One of the ways to avoid it is to stop touching the cut part of the vinyl. I always touch either the edge, or the inside edge along with label. 'Cause more times you touch those dark areas of the record, louder and more noticeable will be those pops and cracks appear during the breakdown.

___________________
Blip, blip, blip...

quote:

Originally posted by fr3sh so this compressed air... do you use the one you buy in a bottle... or one of those industrial ones at low psi... the reason why i ask is i want to know roughly how much pressure i should be using to 'clean' out the vinyl... that static sound is so annoying!!!

I just use the cans of compressed air from the local shops, there not strong enough to do damage, but good enough to blow some crap away.

quote:

Originally posted by 3xx3r7 One of the ways to avoid it is to stop touching the cut part of the vinyl. I always touch either the edge, or the inside edge along with label. 'Cause more times you touch those dark areas of the record, louder and more noticeable will be those pops and cracks appear during the breakdown.

yeah i am actually quite a stickler about that... even when my friends are over... i am quick to say no... don't touch the cut section... edge or center only

but this is a new vinyl

kinda frustrating... its such a good melody

More than likely the actual vinyl, I have had this problem before.

Does the flipside have the same problem?

Give it a clean if that don't work get a replacement from where you bought it from, tell them the problem and they will surely replace it.

Compressed air is teh key...

I love that shit