I wish I had an answer for you, but, I had the same type of issue, but I pretty much had to mess around with the settings. I must have spent over 2-3 hours. Try one thing, then another. Always test plenty. Sorry mate.

Did you just fool around w/ the output settings in Traktor, or do something else? I'm running out of options as it is, I've already spent more than 2-3 hrs on this .

Thanks for the reply though . Back to the drawing board...

___________________
Failed at becoming a god...

Your sound card should be running in a mode like "quadraphonic" or similar as set by a Creative utility, for 2 stereo or 4 channel. Maybe it is just running in regular stereo (2 channels).

quote:

Originally posted by tvmann Your sound card should be running in a mode like "quadraphonic" or similar as set by a Creative utility, for 2 stereo or 4 channel. Maybe it is just running in regular stereo (2 channels).

You can also specify this mode in the windows options for SOUND in the CONTROL PANEL. Come to think of it, I think tvmann is right, I had to do that as well and it worked.

I've tried 2/2.1 modes w/ mono main and mono monitor, only main worked. I've also tried 4/4.1 5.1/6.1/7.1 modes same problem for everything

___________________
Failed at becoming a god...

Another thing to check is that the headphone mix level and volume level are up, using the controls on the Traktor screen, sometimes people forget to check those. There are 2 controls onscreen for Traktor 2.53, I can't remember if there is just one control in v2.6 - anyway the headphone knobs(s) should be up.

Getting the headphones to work in Traktor is a common problem when people are first trying it. Much banging of the head on the wall, sometimes for several days

I think this should help
Go into your computers control panel, Then go into sounds and audio devices >>> then click the advanced button under the speaker settings section and in the dropdown menu select quadraphonic speakers.
I used to have the same problem when trying to setup front and rear outputs with my soundblaster.

quote:

Originally posted by tvmann Much banging of the head on the wall, sometimes for several days

Day two for me, the wall is winning so far .

Thanks for the replies everyone, everything that has been suggested was tried and failed . I've included screenshot so that maybe some traktor users can spot something and direct my attention to it. I've also made a screenshot of my preferences, which shows all available choices for my headphone output.

Let me clarify, in the screenshots im trying to get "Aftershokk" to play (the tune on the left) and I've tried all of the outputs shows - they either play nothing or play "Urban Shakedown"
(the tune on the right)

Here are the screens:


Cheers everyone.

edit:
I also have another SB soundcar - SoundBlaster live (set to Quadrophonic) it's the same story with that one.

And another thing I forgot to mention: Even when I set the signal to mono (Master Left mono, Monitor Right mono) on the same output - I still get no headphone sound

___________________
Failed at becoming a god...

Last edited by OrZonE on Oct-22-2005 at 17:01

I'm a moron. I figured it out, I forgot to push the "cue" button.
Thanks for your help everyone

___________________
Failed at becoming a god...

LOL, well done! Glad it works now...........

quote:

Originally posted by OrZonE I'm a moron. I figured it out, I forgot to push the "cue" button. Thanks for your help everyone

ROTFL !!!!!!
this reminds me of the time i was bangin my head on the desk trying to figure out why there was no sound comin from my headphones.
i plugged them into the wrong jack. wtf.

___________________

thesuperglo - Flaming Popsicle [June 2007 Promo](full-on/dark/goa)