mixing harmonically

Become a part of the TranceAddict community!

Frequently Asked Questions - Please read this if you haven't

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > recording sounds f'ed

Last Thread Next Thread

Author

Thread

a_d_a_m_86
tranceaddict

Registered: Feb 2006
Location: Melbourne

recording sounds f'ed

i have a pretty basic DJ set up, got my dual CD player connected to mixer and then from the mixer (i have 2 outputs, high and low) i connect the high output to my amp/speakers, then the low outputs are connected via RCA -> stereo 3.5mm jack into a griffin iMic, this is connected to my iBook via USB connection, i have audacity open to record, i record my set. But when i go back to either play it back thru the computer OR after i burn it and play the CD, IT SOUNDS LIKE TOTAL ARSE!? why is this!? i'm using the default settings in Audacity. Are these the right sample rates? They are as follows

Default Sample Rate: 44100Hz
Default Sample Format: 32-Bit-Float

i can provide more information at request, including a sample of the crap sound. also i found that i had to turn the input from the iMic down to like, the lowest it can, could this be why? PLEASE SOMEONE HELP ME OUT!!

Apr-19-2006 07:28 Australia

Click here to Send a_d_a_m_86 a Private Message

Xtracktor
EDM Conservative

Registered: Dec 2003
Location: Lathrop, CA

I would plug it into Line-in, not the mic...but is that what you are doing?

Also, what do you mean by high and low?

Last edited by Xtracktor on Apr-19-2006 at 08:45

Apr-19-2006 08:40 United States

Click here to Send Xtracktor a Private Message

a_d_a_m_86
tranceaddict

Registered: Feb 2006
Location: Melbourne

update....

i have fiddled around with some settings... and disccovered that if i record it in MONO not stereo it sounds at least sort of decentish. Also i am using the line in setting

with the high and low, my mixer has two different pairs of RCA outputs, a high voltage (+6dBu(1.55V RMS)) and a low voltage (0dBu(0.775mV RMS)

so im not sure whats happening with this stuff, but im guessing im stuck recording in mono if i want to have any tolerable quality in sound

has anyone else had this problem?

Apr-19-2006 09:30 Australia

Xtracktor
EDM Conservative

Registered: Dec 2003
Location: Lathrop, CA

Just want to double check, you are plugging into the line in on the imic?

Apr-19-2006 09:32 United States

a_d_a_m_86
tranceaddict

Registered: Feb 2006
Location: Melbourne

yes im plugging into the line in.... there is only an input and an output on the iMic, and then a switch to control between mic and line in... the switch is set to linein as per the manual and webpage instructions

Apr-19-2006 09:42 Australia

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > recording sounds f'ed

Last Thread Next Thread

Pilpo Faldini mix unknown track please help me... [2009] [2]

The Generator - Where Are You Now? (Original Mix) [2005]

Show Printable Version | Subscribe to this Thread

Forum Jump:

All times are GMT. The time now is 23:20.

Forum Rules:

You may not post new threads
You may not post replies
You may not edit your posts

HTML code is ON
vB code is ON
[IMG] code is ON

Search this Thread: