ok I just recived an M-Audio Yesterday

This Midi Controller has an integrated soundcard

The problem is that I want to record my mixes , and I'm connecting the master out from my mixer (Vestax PCV-275), to any of the inputs in the ozonic.

when I open the M-Audio FirwWire Audio control panel, it seems to be receiving a signal from my mixer, but I hear no sound on the speakers.

The output' I know it's fine beacuse if I play music from my computer (eg. Winamp) it will sound on the speakers.


1- First I would like to know what to do to be able to hear the sound on the speakers coming from my mixer.
2- What do I have to do to record the mixes, I alreayd have soundforge, but can't llisten anything, it also shows me it's reiciving a signal from my mixer.
3- Also can I connect the mixer with the RCA Cables to an Y-adapter on the input. I mean if it's possible to set one channel on the input (to be Left and Right. on the outputs I know I can't do this, because I have an Y-Adapter and if I connect to only one channel I will listen one speaker, and when I connect to the other channel I will listen to the other speaker or the subwoofer.

Thanks.

___________________
Here are my latest mixes:
Pepa - Pure Bliss (June 2007 Promo)
Pepa - Visual Thoughts (March 2007 Promo)
Pepa - Trippin' Again

Mash-ups:
Perasma Vs BT - Swing 2 Gravity (Pepa Live Mash-up)
I Trance You!

Last edited by Pinokio on Sep-15-2006 at 00:43