I'm pretty sure Mic1/Mic2 are inputs, not outputs.

It only seems like there are two 'main' outputs, and both are RCA.

As far as getting unwanted noise with the RCA connectors, have you tried hooking your monitors to another source to see if it still produces the same noise?

Testing like this will allow you to isolate the problem- either it's your speakers or your mixer or possibly both (ground loop?).

quote:

Originally posted by AnomalyConcept I'm pretty sure Mic1/Mic2 are inputs, not outputs. It only seems like there are two 'main' outputs, and both are RCA. As far as getting unwanted noise with the RCA connectors, have you tried hooking your monitors to another source to see if it still produces the same noise? Testing like this will allow you to isolate the problem- either it's your speakers or your mixer or possibly both (ground loop?).

I am using a ground loop isolator right now and it has fixed the problem.

But I was looking to upgrade to a better mixer soon anyways...so I was trying to find a new mixer that has the TRS inputs. Guitar center told me that if my current mixer had TRS inputs, then I would NOT need the ground loop isolator that I am having to use right now.

Those are inputs on the DJM-400 not outputs, youll need to goto the DJM-800, which has balanced XLR outputs.

quote:

Originally posted by Psychotron Those are inputs on the DJM-400 not outputs, youll need to goto the DJM-800, which has balanced XLR outputs.

would i be ok if i stepped down to the djm-600? I cant seem to get a picture of the back of a 600 to see what all is on the back. And on the spec sheet it shows only ONE XLR output which seems wierd. But i think I might see balanced XLR outputs....cant be for sure.

both the 600 and the 3000 have XLR outs.

___________________
check out my guest mix for OndaSonora Podcast (aug.2009)

i have the stanton rm 404 and it has xlr outputs...it only costed me 300 too! plus it actually works really well and i find it more pleasurable to mix with than the djm-500 or 600...

___________________

since we're sort of on the topic and i dont want to clutter the main thread area im just going to ask this here:

anyone know if you can get XLR > RCA wires or converters??

you can, but the RCA's wont be balanced (obviously).

quote:

Originally posted by Soundwerks you can, but the RCA's wont be balanced (obviously).

And is that a noticable difference? If so, how is the sound different?

Thanks.

___________________
Click the link below to stream all of my mixes past and present. New mixes go up about once a month. Enjoy!

www.mixcloud.com/jluger

well, balanced is always better. Since its balanced, it cuts out all outside noises, ground hum and hiss etc...

For instance, when I use my ECLER's RCA outs, it sounds good...but when I used the balanced XLR outs with a good amp, it sounds GREAT! It's all "clean" sounding...no hum, no hiss, no static etc.

Gotcha

___________________
Click the link below to stream all of my mixes past and present. New mixes go up about once a month. Enjoy!

www.mixcloud.com/jluger