|
| quote: | Originally posted by No Left Turn
I think you want to make the choice between passive or ACTIVE.
DI boxes are only needed to turn a line level signal into a mic level signal. A vocal mic is not a line level signal (obviously), so a DI box is not needed for you to plug your mic into your mixer.
However... unless your "vocal mic" is a dynamic mic, you're going to need phantom power to power it up, which dj mixers do not have. If it is dynamic, then all you need is an XLR -> 1/4" cable to plug into the mixer. You may run into a problem with that though, since the mic is a mono source and the channels on the mixer are stereo. Unless of course, that mixer has a mic input on it.
I hope some of this helps you! |
sorry yes i did mean active
i was told that with an XLR to 1/4 cable i would run into problems and i would need a DI box to make this work. was i told wrong?
and my mics are ADK A-51s and SC-2 if that helps
thnx
___________________
Check out my Podcast for some bootshaking House & Techno!
http://chrisharrington.podomatic.com
|