Hey guys

I got a quick question that maybe some of you might know. I'd like to put the filters effects of my Xone:92 in the headphones (Monitor output) when a channel (song) is on cue. Even if I turn the knobs when the filter is on, it doesn't work in the monitor, only on the main outputs. The filters effects don't seem to be routed to headphones.

Anyone can help me out on this one ???

Thanks

Neo

You can't monitor the filters on the xone92.

When I first got mine about 2 months ago, I also thought that this would be a problem but a after a while of using the filters you'll start to just know what it will sound like before your activate the filter 'live' - if you know what I mean.

Just keep using them and soon it will all become natural to ya

___________________
::::: DjTrig.Com :::::
Afterward - July 2009 Mix

doh

What if I need to find the frequency of a vocals (or sound) that I like while I'm live ? Can I use the Booth output with filters ?

quote:

Originally posted by Neo Hacker doh What if I need to find the frequency of a vocals (or sound) that I like while I'm live ? Can I use the Booth output with filters ?

Like I say, with practise you will just know where to turn the frequency knob to get the desired sound.

A little tip is to use the HPF and start with turned all the way to the right so that it is fully closed (usually most sounds wont get through) and then slowly turn it to the left so that it starts to let the more mid-range frequencies come through.

For vocals, around the 1-2 o'clock position should get the desired effect.

Not sure what you mean about the Booth output as this just outputs whatever is going through the main Mix outputs (someone correct me though if I'm wrong).

___________________
::::: DjTrig.Com :::::
Afterward - July 2009 Mix

gonna post my question here instead of making a new thread.

does everyone have a small click/glitch in the sound when activating the filters? i just got my xone:92 rotary a while ago and i've noticed this and i have to say that i find it quite annoying. the manual says that you have to assign the channel to either of the filters before turning the filter on to avoid these clicks (i think it was this way, not the other way around), but it doesn't matter which way i do it, the clicks are still there.
so should i send it back or what?

___________________

Get Dropbox, with 250 MB extra space!

quote:

Originally posted by skip gonna post my question here instead of making a new thread. does everyone have a small click/glitch in the sound when activating the filters? i just got my xone:92 rotary a while ago and i've noticed this and i have to say that i find it quite annoying. the manual says that you have to assign the channel to either of the filters before turning the filter on to avoid these clicks (i think it was this way, not the other way around), but it doesn't matter which way i do it, the clicks are still there. so should i send it back or what?

Mine does exactly the same thing but I remember when reading a review of the mixer that this was mentioned so I'm not concerned about it. From what I've read, most if not all mixers give this slight click sound when activating the filters.

Anyway, if you activate the filter on the beat (which I presume you would do anyway), you will not hear this sound.

___________________
::::: DjTrig.Com :::::
Afterward - July 2009 Mix

You are correct. The Xone's make a click when engaging the filter. Even the 3D does it.

One little trick I found after having the 92 for a long time... the filter engage seems to have a little capacitance to it. So after you first turn your mixer on, with no music playing... try turning off and on the filters a few times. The first few clicks are much louder than the subsequent.

As long as you do that a few times before you start playing, and use the filters on beat, the click won't be a problem.

quote:

Originally posted by agentdansmith Mine does exactly the same thing but I remember when reading a review of the mixer that this was mentioned so I'm not concerned about it. From what I've read, most if not all mixers give this slight click sound when activating the filters. Anyway, if you activate the filter on the beat (which I presume you would do anyway), you will not hear this sound.

ok. thanks guys. and i would activate the filters on beat, but i haven't really even tried to work them in a mix, just played around with them to see how they work, flicking them on/off at random points, thus noticing the clicks better.

___________________

Get Dropbox, with 250 MB extra space!

I just keep the HP filter on at all times, then I don't have to worry about the popping noise.