Since Paul Van Dyk has been using the Allen & Heath X-ONE 3D his sets have included a really nice sounding effect (sample pasted below) it sound great when he uses it throughout his sets and mainly at a breakdown.
I dont how this effect is being used- is it an effect on the mixer or is it something he has made and uses one on the sends on the Mixer to control it etc?
To me it sounds like a looped Hi hat with reverb and delay and a cymbol crash at the end but im not sure.
Help would be greatly appreciated on this one as I just got myself a 3D and would like to have something similar in my sets.
Originally posted by Laszlo
I reccon he's using one of the six zillion effects in Ableton.
I reckon you're right.
___________________
quote:
Originally posted by eye_03
the reason why i dont do it is because i see people like you at clubs doped out of your mind. i say "shit, i dont wanna turn out like that scumbag"
Registered: May 2003
Location: Los Angeles (OC) / Mexicali
I've been able to create something similar it using CDJ's & a DJM3000/600. I haven't tried it on my DJM800.
The way I done it was by applying the echo effect to the outgoing deck, than bring up the echo little by little, kinda like making a build up. Than, on the CDJ, make sure you have it set up so that the platter will slow down when you press stop on the outgoing deck. Press stop while applying the effect, and BAM!!! Sometimes it works, sometimes it doesn't. If you practice with it, you'll get something close.
Sep-13-2007 16:42
theognis1002
Supreme tranceaddict
Registered: Dec 2006
Location: Virginia, USA
is this the one he used a shiton in Global Gathering 2007?
i remember he used it alot during his transitions
___________________
Sig removed - over max allowd height
Sep-13-2007 19:35
Laszlo
The weekend has landed
Registered: Dec 2002
Location: Szekelyföld Status: Official Montreal Canadiens fan of TA
quote:
Originally posted by DjWoody
I've been able to create something similar it using CDJ's & a DJM3000/600. I haven't tried it on my DJM800.
The way I done it was by applying the echo effect to the outgoing deck, than bring up the echo little by little, kinda like making a build up. Than, on the CDJ, make sure you have it set up so that the platter will slow down when you press stop on the outgoing deck. Press stop while applying the effect, and BAM!!! Sometimes it works, sometimes it doesn't. If you practice with it, you'll get something close.
