How can you kill a zombie if it's already dead?

___________________
"You won a new refrigerator, great! Where you gonna put it?" - Tony Danza

quote:

Originally posted by Marc Summers How can you kill a zombie if it's already dead?

You have to kill the brain ie: a headshot from a bullet usually does the trick.

This should help you understand the logic...

http://www.amazon.com/gp/product/B0...rd_i=B0001611DI

Copy the URL into Google, hit search then hit "Translate Page".

Please deposit 5 cookies to my offshore account as a reward.

___________________

quote:

The new Audi S6 were lights and lights in a light with LED technology . Here, the LEDs light in the state-controlled mode dimmed and the day Fahrlicht-Modus at full brightness. The dimming is done using pulse width modulation over The control unit of S6, it is true that if you have to simulate the parking light function Wants.

Already tried translating the page but loads of words are wrong, hence why i need someone to translate it properly

uhh www.freetranslations.com?

http://fets5.freetranslation.com/?s...ssword=xO0y3uwr

Here there are the Audis S6 TFL more favorably than in Audi itself!!!

In the new Audi S6 became standing light and day load light in a lamp with LED-technology
Realizes. At the same time the LEDs in the standing light-mode gedimmt headed for and in the day
Load light-mode with full brightness. The Dimmung results by means of pulse expanse modulation over
the tax device of the S6, this it counts to simulate if one use the standing light function
Liked.

If one this lamp only as TFL use needs would like one no tax device
Instead of its one gives pis 2 on the tax entrance + 12V. Pi 1 is + 12V and pi 1 = mass.
The pi-number are not to be found separate stamped on the lamp in the connector.

Purely theoretically one can incorporate the lamps into each vehicle if one for that
Place has and adapts the push seaweeds of the lamp. Yet for that every is even responsible.
There I not understandably can help, can look except in the Passat there its here.
There are installation aids for the Skoda Superb here.

Thanks to E-check character, an entry is not appeared required, it however that that
Police there not so bewandert is. It is register therefore better the lamp of the TÜV to
Let, goes this entry thanks to check character without problem off.

That applies to all vehicles if the day load lamp correctly are mounted.
Day load lamp must follow mounted be how:
- Least distance of the ground 25 cm if the lamps are used only as a TFL.
- Least distance of the ground 35 cm if the lamps would be used as a TFL and standing light.
- Maximal distance of the ground 150 cm.
- The distance between the lamps must be at least 60 cm.
- The distance of the Fahrzeugaussenkante maximally 40 cm.





A tax device of suitable (to the left in the picture) one can
buying in MSH-electronics, or one solders itself
One (see below).

The selbstgebaute offers however only the reason function
To shift between TFL and standing light.


Here another couple of pictures of the DOT-numbers the day load lamp.
RL is for day load lamp and A for limitation light ahead.



Part number Description Euro
4F0 941,067A LED-Standlicht and day load lamp, to the left 101.39
4F0 941,068A LED-Standlicht and day load lamp, to the right 101.39
8H0 807,199A Innensechsrund-Blechschraube 5X21 (4x) 0.44
3D0 973,703 more suitable 3-poliger connector (2x) 2.50
000,979,131 suitable single direction with 2 contacts (3x) 1.37
357 ,972,740 F Single direction seal (6x) 0.49
216.59