I fail to see how that setup isn't going to work, as that is typically how you'll setup a 2x4. Just set up your gear normally and send your mixers out signal to an extra channel on your friends mixer, or vice versa. Simple.

okay thanks we only tried it once then gave up so we prob made a mistake somewhere in there

ill unplugged everything and start from scratch

cheers!

Did you plug into PHONO instead of Line? that might be it.

___________________

quote:

Originally posted by RJT I think it's more like throwing a baby shower for an abortion.

quote:

Originally posted by Kevy Kev When I lived in Vegas I once peed in the elevator at the MGM, cut it off mid stream to let a family get in then finished peeing when they got out of the elevator.

Yup, thats how I've set it up before and it works great, I'd recommend using your "record out" of one of your mixers to feed into a channel on the other mixer so you don't send too high of a signal by accident.

also, a nice thing to do, is even if your mixer out goes into one of his channels, and his is the "master mixer" by which sound gets to the speakers, if he has an extra out you can plug into your mixer too, it's good if you want to headphone monitor what he's playing instead of relying purely on speakers.

___________________
check out my guest mix for OndaSonora Podcast (aug.2009)

I've often wondered how this is done, say you have person 1's mixer going into channel 1 of person 2's mixer. Person 2 can mix easily, but how when it gets back to person 1, how does he fade the tune thats playing? As they would need to lower the channel 2/3/4 etc on Person 2's mixer

hey guys i tried it again it worked but the song coming from my mixer through his channel is reallllllllly distorted.

I have to turn my mixer volume down to like just above nothing for it not to sound distorted

but then i cant crank the gain on the other mixer because itll sound distorted

any halp?

quote:

Originally posted by tongaface hey guys i tried it again it worked but the song coming from my mixer through his channel is reallllllllly distorted. I have to turn my mixer volume down to like just above nothing for it not to sound distorted but then i cant crank the gain on the other mixer because itll sound distorted any halp?

plug it in the line input, not phono

___________________

Get Dropbox, with 250 MB extra space!