DJTJ
linuXaddict

Registered: Jan 2001
Location: Bournemouth, UK when I'm at home, Cardiff, UK when I'm at uni
|
|
|
What cartridges are you using? If you are using Ortofon Concordes, then it could be those. Take the carts out and wipe the contacts with a Q-tip dipped in alcohol, and do the same with the contacts on the inside of the tonearm. See if this works.
If not, then try cleaning the faders in your mixer. Get one of those eye-dropper things, you know, the thing with a plastic tube with a hole on one end and a rubber bit on the other end, and get a few drops of alcohol in it. Then, dump the alcohol literally into the gap where the slder goes on the mixer. Don't be afraid of dong this; as long as you use proper isopropyl alcohol (not water!) then it won't harm the mixer. Then move the fader up and down fairly vigorously so that the alcohol get rubbed in. This should clean any dirt/grime off the contacts in the fader.
|
|