Thats probably because you still have the channel fader up. Set the sends to pre fader and then turn the channel down and see if it still happens.

___________________
New Mix: March 2010 Promo
Soundcloud|Facebook

quote:

Originally posted by kitphillips Thats probably because you still have the channel fader up. Set the sends to pre fader and then turn the channel down and see if it still happens.

Yeah, that works. But then all you get is the return signal when you turn the knob, no transition from the dry signal.

Take for instance a DJ/Live setup, I might want to run the track through a delay on the return channel. I wont be able to do this using what you mentioned above as I would have to turn off/down the fader, which means no music.

___________________

>>> Beatport Stuff <<<

can you use 2 channels?

1 for the original dry signal, with no send/return
1 for the wet signal with prefader send

edit: hey, did you copied the location in my profile?

Last edited by djsphere on Jan-21-2009 at 15:14

quote:

Originally posted by djsphere can you use 2 channels? 1 for the original dry signal, with no send/return 1 for the wet signal with prefader send

I am unsure how that would work, as I would still have to lower the dry signal/dry channel in order to silence it to purely hear the wet signal.

___________________

>>> Beatport Stuff <<<

quote:

Originally posted by djsphere edit: hey, did you copied the location in my profile?

___________________

>>> Beatport Stuff <<<

On your audio/midi track, set "Audio To" to Sends Only.

___________________
"When I read about the evils of drinking, I gave up reading."

quote:

Originally posted by Sean Walsh On your audio/midi track, set "Audio To" to Sends Only.

Tried that Sean.

If it is set to Sends Only, the clip I wish to play is silenced. So there is no fully dry signal to fully wet transition.

___________________

>>> Beatport Stuff <<<

What effect are you running on the send? If it doesn't support a dry/wet output then you can't do it.

For example if you have a compressor on the send, it will always be applied. However if you have a delay, changing the dry to 100% will result in just that, and then you can adjust the knob on the effect itself to control the amount.

___________________
"When I read about the evils of drinking, I gave up reading."

Ah, did you mean then controling the transition via the effects on the return channel?

*EDIT: Like you said above.

Because that works.

But it will raise issues in my live setup with my external soundcard. My setup has 4 tracks in Ableton sent via the soundcard to 4 individual channels on an external mixer. With this technique I would have to run the tracks through the return channel, which only has one output, which means 1 channel on an external mixer

___________________

>>> Beatport Stuff <<<

You're missing the point of a send, they aren't like a mix knob, Its a different way of running your effects. In a mix knob configuration, its like crossfading between the two channels. But in a sends configuration, you control the dry level and wet level completely seperately.

___________________
New Mix: March 2010 Promo
Soundcloud|Facebook

quote:

Originally posted by kitphillips You're missing the point of a send, they aren't like a mix knob, Its a different way of running your effects. In a mix knob configuration, its like crossfading between the two channels. But in a sends configuration, you control the dry level and wet level completely seperately.

So I will have to control the wet level with the send knob, and when I want to get rid of the dry signal I will have to turn down the channel fader? and visa-versa.

___________________

>>> Beatport Stuff <<<