 |
|
|
|
 |
chewy dragee
Senior tranceaddict
Registered: Jun 2009
Location: Your mom's house
|
|
|
Shall check them out!
Mayhap I shall get one and then later get another one. It just doesn't seem right to only have one speaker.
I have a djm800 and I see it does have XLR out, so no problems there.
|
|
Nov-23-2009 14:57
|
|
|
 |
 |
chewy dragee
Senior tranceaddict
Registered: Jun 2009
Location: Your mom's house
|
|
|
I can not find any qsc K series speakers and the one I did find was a Fing expensive.
What about Samson LIVE 1215 Two-Way Bi-Amped Active System, 500W RMS
Are samson any good?
or Behringer B215a 400 watts Powered Loudspeaker
Are Behringer any good?
|
|
Nov-23-2009 15:25
|
|
|
 |
 |
chewy dragee
Senior tranceaddict
Registered: Jun 2009
Location: Your mom's house
|
|
|
Thanks for the toms link.
Strange that they did not show up on a google search on google.co.za
Thanks guys, if I don't get the QSC I'll get the behringer B215A
|
|
Nov-23-2009 17:54
|
|
|
 |
 |
miamitranceman
Extreme tranceaddict

Registered: Nov 2004
Location: Miami
|
|
|
| quote: | Originally posted by Apeattack
Hi all,
I am looking to get my first decent speakers that are good for a small event but won't destroy my bank account. A search of TA brought me to this thread.
After reading the users' comments and doing some research on my own I am very interested in the Behringer B215A, but am unsure how to use it with my current equipment. I am just getting started in the wonderful world of speakers, so my questions probably are very simple.
I use a Numark Omni Control (along with Traktor on my laptop) when I perform live. The Omni Control has an RCA output while the Behringer B215a has an XLR input. There are adapters that will connect the 2 RCA (both red and white) cables into 1 XLR cable. Are there any issues with sound quality using this type of adapter?
If I use two speakers, will I need to have a XLR-to-XLR cable go from the line output of the first speaker (the speaker connected to the Omni Control) to the second speaker?
For a room that is ~20'x40', will one speaker be decent?
Thanks in advance. |
Hmm...I am not sure about the speaker to speaker connection. I know you could always pick up one of those inexpensive mixing boards where you plug everything into the ins and then it has multiple outs. Behringer makes some basic ones for like 40-60 bucks at Guitar Center.
Quality-wise, for PAs (and monitors for that matter), it'd be better if you had balanced outs (XLR or 1/4 in connections) because that means little to no interference or static sounds on your PAs. Also, you can run much longer XLR cables if you need to position the PAs far away from your Omni Control. You can get away with RCAs if you have to though (I did with my DJM-400 back in the day, which had no balanced outs, only RCAs). But MOST IMPORTANTLY, if you go RCA, pick up a few ground loop isolators from Radio Shack. they're under 20 bucks each and will significantly cut down on the static/interference from the RCAs, your laptop, etc.
One other option I thought of are direct boxes, which convert unbalanced to balanced. I've never used one myself though.
___________________
Click the link below to stream all of my mixes past and present. New mixes go up about once a month. Enjoy!
www.mixcloud.com/jluger
|
|
May-04-2010 23:05
|
|
|
 |
 |
Apeattack
:D

Registered: Dec 2008
Location: OC, CA
|
|
|
May-05-2010 20:37
|
|
|
 |
All times are GMT. The time now is 14:17.
Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
|
HTML code is ON
vB code is ON
[IMG] code is ON
|
|
|
|
|
|
Contact Us - return to tranceaddict
Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
|