I was looking at a pure saw in Sylenth1 through a spectrum analyzer, and the notes C3 and above have some part of the very high end cut off. Once you press B2 or anything lower you get those high end frequencies back.
I was comparing it to Twin 2, and Twin doesn't seem to do this.
___________________
quote:
Originally posted by dj_alfi
change your avatar for fucks sake.
Jun-03-2010 06:41
Quantize
Junior tranceaddict
Registered: Apr 2010
Location: London
Is it something really obvious that you can hear? or do you just notice it in the analyser?
If it's the later I wouldn't worry to much about it. It might just be part of the character of the synth.
Jun-03-2010 09:39
kitphillips
is actually a guy.
Registered: May 2006
Location: Sydney, Australia
Might be an anti aliasing filter kicking in. Or you could be running into the top end of the sample rate.
Originally posted by kitphillips
Might be an anti aliasing filter kicking in
most likely this
Jun-03-2010 13:42
Beatflux
Rising Star in training
Registered: Mar 2006
Location: Planet Alf
It's in the 15k-18k range, but I always thought it sounded a bit "dull."
___________________
quote:
Originally posted by dj_alfi
change your avatar for fucks sake.
Jun-03-2010 16:59
adamtrance
tranceaddict
Registered: Oct 2004
Location: Stockholm
its done on purpose to reduce cpu, so those frequencies are taken away
___________________
Jun-04-2010 10:38
Beatflux
Rising Star in training
Registered: Mar 2006
Location: Planet Alf
quote:
Originally posted by adamtrance
its done on purpose to reduce cpu, so those frequencies are taken away
Ooo, ok. Thx.
___________________
quote:
Originally posted by dj_alfi
change your avatar for fucks sake.
Jun-04-2010 20:59
Looney4Clooney
Supreme tranceaddict
Registered: Apr 2010
Location:
quote:
Originally posted by adamtrance
its done on purpose to reduce cpu, so those frequencies are taken away
how so ? It would need to filter out those frequencies which would require cpu cycles. Seems the aliasing issue would be more the case ? Again not sure as I don't use it.
Jun-04-2010 22:34
adamtrance
tranceaddict
Registered: Oct 2004
Location: Stockholm
quote:
how so ? It would need to filter out those frequencies which would require cpu cycles. Seems the aliasing issue would be more the case ? Again not sure as I don't use it.
No its not filtering, it it were a filter you would see a falloff, and there is no, the harmonics just stop. So its being band limited, so it has to calculate less harmonics, or its using some other method that I dont know of. But lennard said himself its there to reduce cpu, Im just saying what he says
___________________
Jun-05-2010 08:10
vikernes
Senior tranceaddict
Registered: Jul 2006
Location: Bahamas
quote:
Originally posted by adamtrance
No its not filtering, it it were a filter you would see a falloff, and there is no, the harmonics just stop. So its being band limited, so it has to calculate less harmonics, or its using some other method that I dont know of. But lennard said himself its there to reduce cpu, Im just saying what he says
I remember reading that. btw, if you up the sample rate it doesn't get cut off. So there, problem solved...
