Become a part of the TranceAddict community!Frequently Asked Questions - Please read this if you haven'tSearch the forums
TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Dual 1/4" Mono to 3.55mm.
Pages (2): [1] 2 »   Last Thread   Next Thread
Share
Author
Thread    Post A Reply
Doza
Supreme tranceaddict



Registered: Feb 2006
Location: Oakville, Canada
Dual 1/4" Mono to 3.55mm.

Hey guys. I'm trying to find a way to connect my Vestax PCV 275 to both my amp and my laptop(for recording). One option is the UCA-202. I was HOPING to find something similar to the cable below. Anyone know where I can get these? I can only see them online, but not in any stores.

Note: The pcv275 has two master outs: one with regular left/right RCAs (which are currently going to my amp, and one with left/right 1/4' monos (which i need to go to my laptop).

Thanks!

Old Post Jul-21-2010 17:49  Canada
Click Here to See the Profile for Doza Click here to Send Doza a Private Message Add Doza to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Rebel Brown
Supreme tranceaddict



Registered: Jul 2005
Location: UK

If you can find them online, why not just buy one? They can't cost more than a dollar, surely?

Old Post Jul-21-2010 18:00  England
Click Here to See the Profile for Rebel Brown Click here to Send Rebel Brown a Private Message Add Rebel Brown to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Doza
Supreme tranceaddict



Registered: Feb 2006
Location: Oakville, Canada

quote:
Originally posted by Rebel Brown
If you can find them online, why not just buy one? They can't cost more than a dollar, surely?


Hey thanks for the reply. Everywhere I've looked online they are about $5-$10, and then shipping is another $10-$15. Which defeats the purpose of me trying to save money by not getting the UCA-202.

Old Post Jul-21-2010 18:12  Canada
Click Here to See the Profile for Doza Click here to Send Doza a Private Message Add Doza to your buddy list Report this Post Reply w/Quote Edit/Delete Message
djsaekone
Supreme tranceaddict



Registered: Feb 2007
Location: Northern VA

try radioshack


___________________
DJ/Producer

Old Post Jul-21-2010 18:57  United States
Click Here to See the Profile for djsaekone Click here to Send djsaekone a Private Message Visit djsaekone's homepage! Add djsaekone to your buddy list Report this Post Reply w/Quote Edit/Delete Message
PivotTechno
senseless



Registered: Feb 2008
Location: Citizen, World

You're in Oakville?

http://www.long-mcquade.com/locatio...rio/Burlington/

They should carry them.


___________________
4a.m.deepdarksweatypulsingwarehousemusic

WestsideWax Soundcloud

WestsideWax Mixcloud

New! WestsideWax Archives

Old Post Jul-21-2010 22:24 
Click Here to See the Profile for PivotTechno Click here to Send PivotTechno a Private Message Add PivotTechno to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Doza
Supreme tranceaddict



Registered: Feb 2006
Location: Oakville, Canada

Thanks for the replies everyone. I'll check out L&M. Already asked The Source and they said they've never even seen it before hahaha.

Old Post Jul-22-2010 01:38  Canada
Click Here to See the Profile for Doza Click here to Send Doza a Private Message Add Doza to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Brandt Slater
Supreme tranceaddict



Registered: Feb 2010
Location: Long Beach, California USA

Do you have a Guitar Center or a Sam Ash near you? Or something similar? That's a pretty common adapter. That's interesting that the source said they've never seen this type of adapter before.

Old Post Jul-22-2010 19:22 
Click Here to See the Profile for Brandt Slater Click here to Send Brandt Slater a Private Message Add Brandt Slater to your buddy list Report this Post Reply w/Quote Edit/Delete Message
Rebel Brown
Supreme tranceaddict



Registered: Jul 2005
Location: UK

If you can't get one locally then just eBay it, obviously this cable is in pounds but £2.69 is dirt cheap.

Old Post Jul-22-2010 20:30  England
Click Here to See the Profile for Rebel Brown Click here to Send Rebel Brown a Private Message Add Rebel Brown to your buddy list Report this Post Reply w/Quote Edit/Delete Message
andydavey
tranceaddict



Registered: Aug 2005
Location: Southampton, UK

Unless the input on your laptop is a line in then don't bother with getting the cable. It'll more than likely be a mic input and sound terrible when you feed it with a line level signal - I'd stump up the £20 for the UCA-202 if I were you.


___________________
Andy Davey - Concept 93 (Deep house/techno mix)

Old Post Jul-23-2010 20:30  United Kingdom
Click Here to See the Profile for andydavey Click here to Send andydavey a Private Message Visit andydavey's homepage! Add andydavey to your buddy list Report this Post Reply w/Quote Edit/Delete Message
jdat
Jay Van Dat



Registered: Oct 2001
Location: I dont even know

If you have one of these laying around use it:


with this:



cheaper and easier to find in most cases

Old Post Jul-24-2010 01:15 
Click Here to See the Profile for jdat Click here to Send jdat a Private Message Add jdat to your buddy list Report this Post Reply w/Quote Edit/Delete Message
feelgood
im cool, i swear.



Registered: Dec 2007
Location: Guelph

I picked up a couple of RCA -> 1/4" adapters for my xone awhile ago. They only cost 4$ for a pair and i havent noticed any feedback or signal loss through them.

I got mine at 'Gear Music' on Kerr st in Oakville btw.


___________________
fb.
soundcloud.
residentadvisor.
release.

Old Post Jul-27-2010 18:53  Trinidad and Tobago
Click Here to See the Profile for feelgood Click here to Send feelgood a Private Message Add feelgood to your buddy list Report this Post Reply w/Quote Edit/Delete Message
PivotTechno
senseless



Registered: Feb 2008
Location: Citizen, World

I had a look at the pcv-275 manual, and correct me if I'm wrong, but I'm not sure where you're getting the idea that the 1/4" outputs are mono. Why not just get a 1/4" to whatever input your amp takes, and an rca to 1/8" cable for your laptop?

And most laptop mic inputs double as a line in - I record using Soundforge, going from the rec out on my mixer to the 1/8" in on my laptop and have never had a problem with sound quality. Now, with an A&H mixer (which I have), the rec out isn't affected by the master volume - in your case, just use recording software with display meters and keep an eye on the master level from your mixer.


___________________
4a.m.deepdarksweatypulsingwarehousemusic

WestsideWax Soundcloud

WestsideWax Mixcloud

New! WestsideWax Archives

Old Post Jul-28-2010 12:58 
Click Here to See the Profile for PivotTechno Click here to Send PivotTechno a Private Message Add PivotTechno to your buddy list Report this Post Reply w/Quote Edit/Delete Message

TranceAddict Forums > DJing / Production / Promotion > DJ Booth > Dual 1/4" Mono to 3.55mm.
Post New Thread    Post A Reply

Pages (2): [1] 2 »  
Last Thread   Next Thread
Click here to listen to the sample!Pause playbackUnknown tune #2 [2005] [0]

Click here to listen to the sample!Pause playbackX-press 2 - ACDC (?? Remix) [2002]

Show Printable Version | Subscribe to this Thread
Forum Jump:

All times are GMT. The time now is 19:24.

Forum Rules:
You may not post new threads
You may not post replies
You may not edit your posts
HTML code is ON
vB code is ON
[IMG] code is ON
 
Search this Thread:

 
Contact Us - return to tranceaddict

Powered by: Trance Music & vBulletin Forums
Copyright ©2000-2026, Jelsoft Enterprises Ltd.
Privacy Statement / DMCA
Support TA!