my coffin is mounted on 2 ancient blown speakers. the milk crate bit would be a great idea, not so fond of the wall mounting..id be too afraid of it falling off.

___________________
Retired TA.

I just measured the dimensions of my decks and mixer, and made my own table out of wood. Its a bit heavy, but its exactly how I want my equipment set up!

___________________

make sure u glue the milk crates or summat so they don't fall over

___________________

w: www.luketerry.com

Yeah thinking about it, I don't think crates would be a good idea. I think in terms of performance, the best thing to use would be like a trash barrel (a big thick plastic one) and put it upside down. Get 2 of them to use a columns and put my coffin on top... but I don't really want to put trash barrels in my apartment -- they don't compliment the leather. I think I might look into building a table of sorts, or maybe just getting a cheap desk or something.

What kind of setups are you guys running?

2x decks
1x mixer

For now thats all the stuff I am using, although I hope to get a 3rd deck soon. Just make it however you like it, for mine I really spaced things out, because I hate spinning on a cramped setup. I left gaps in the back so my wires could do their thing without getting in the way / looking ugly!

Caleb

___________________

I'm already accustomed to the battle setup which has everything pretty close, and I dont really plan on getting anything more than 2 decks and a mixer in the forseeable future. My space is also kind of limited.

How did you go about building your table? Did you just get like a real thick piece of plywood and put it on 4 cloumns or something?

goto IKEA or woteva u hav in america and buy a table or hire a private joiner 2 come and make u a specific table

___________________

w: www.luketerry.com

I got my stuff on an Ikea thinggy like this

___________________
H A R D T E C H N O . NL The first dutch hardtechno forum,also for belgian people

shompton:

I got one big sheet of plywood (5x8) and then 2 2x3's and then measure away to what I wanted. I ended up putting half of the plywood on the bottom, making my holes (?) for my mixer and decks to sit in, and thats where I put the 2x3's (cut to size of course) then I put the other half of the plywood on top, and then cut out the holes for the decks and stuff.

I'll try and get a picture for you...

Caleb

___________________

Iv got my shit on a coffe table and 4 cender blocks it works though so maybe you should try that

go to home depot, lowes, etc etc... and get a board that's decently thick (1/2" or so) that will fit your equiptment on.

then stack a bunch of cinder blocks in the corner to support this board a little above waist level.

8x16 cinder blocks are usually about $1.25 each and i doubt you'd need more than 12 of them. wood isnt very expensive, either.

then get a nice black satin sheet and drape it over the top of your cinder block stand. it's cheap, sturdy, and easy.