Check if your recording source is activated.
Go to the sound mixer of windows (double click on the little speaker icon in the systray).
There, go options -> properties
Click the record radio button, and see if the right recording sources are checked (if they are not, they won't show up in the recording mixer).
Click ok, you should get a mixer window, but this time for recording purposes. The checkbox of the adequate source should be checked (i guess you are using the line in). If it's not checked it's not record enables. Adjust the slider until you get a good signal (= loudest peak as close to 0 dB as possible, without actually reaching 0 dB itself).

Hope this helps.

Alright, have went to the windows mixer and put it to recording phase....I have selected Line In and turned the volume all the up. I have also set my card to Allegro something......

The meter in Cool Edit only max out at -54

I go to switch to Mic and the meter max out -24


Also, I am able to record in Mic but not Line In

___________________
The Friday Night Backspin - 90.9 FM 6-10 PM
My Website
WTB--Favorite/WTB Vinyl:

1.Baby Anne- Version 5.1
2.Silicone Works- Daylight (Breaks)


Please PM me if you have these.

You sure you connected your setup to the line in?