Hello

I'm hoping someone can help me understand something, but first...

PROBLEM: This mixer is supposed to have a superior cross fader, but after a short while it starts to crackle.

SOLUTION: I'm sure this goes with all mixers but using "electronic contact cleaner" spray will clean the gunge off the cross fader components and make it work like new.

Anyways back to my problem

I have hooked up an effects unit to the SEND and RETURN loop. Does anyone else have an annoying high pitched wooshing distorting noise when hooking it up in this fassion?

ive hooked up the Korg Kaoss Pad 2 and a Pioneer EFX 500 through this manner and the noise occurs. If I hook it up direct, as in OUTPUT of the mixer to the INPUT of the effects unit and the OUTPUT of the effects unit to the INPUT of the amp, there is no annoying noise.

I would like to use the SEND/RETURN feature cause then I can switch off the effects unit and still play, as well as have some control with my mixer.

any thoughts or solutions? Is it the fault of my mixer thus being too bad for me?

thanks for all your help

hmm.. my fader has never crackled, had the mixer over a year now.

anyway, i haven't tried the send and return on the mixer either. you tried hooking it up the other way?

___________________

Visit my site Antiwar Homepage

quote:

Originally posted by Avro Hello I'm hoping someone can help me understand something, but first... PROBLEM: This mixer is supposed to have a superior cross fader, but after a short while it starts to crackle. SOLUTION: I'm sure this goes with all mixers but using "electronic contact cleaner" spray will clean the gunge off the cross fader components and make it work like new. Anyways back to my problem I have hooked up an effects unit to the SEND and RETURN loop. Does anyone else have an annoying high pitched wooshing distorting noise when hooking it up in this fassion? ive hooked up the Korg Kaoss Pad 2 and a Pioneer EFX 500 through this manner and the noise occurs. If I hook it up direct, as in OUTPUT of the mixer to the INPUT of the effects unit and the OUTPUT of the effects unit to the INPUT of the amp, there is no annoying noise. I would like to use the SEND/RETURN feature cause then I can switch off the effects unit and still play, as well as have some control with my mixer. any thoughts or solutions? Is it the fault of my mixer thus being too bad for me? thanks for all your help

i had de same prob,and i had that mixer for 2 n half yrs,and i just changed my mixer to djm600 ,i tell myself not to get anymore vestex mixer(coz i found out vestex cross fader realli weak n sux

___________________
MUSIC FOR LIFE ~

quote:

Originally posted by nick_energy i had de same prob,and i had that mixer for 2 n half yrs,and i just changed my mixer to djm600 ,i tell myself not to get anymore vestex mixer(coz i found out vestex cross fader realli weak n sux

yep agreed. Vestax is not the best name brand when it comes to mixers. It's more popular with hiphop/reggae DJs too.

next time u go buy a mixer my friend, i recommend Behringer strongly.
affordable yet not cheap, light weight yet heavy duty. It's an amazing mixer.

or just go with club standards if u can afford em. Stay away from pioneers. The fadders and knobs feel like they're gonna break under u! if u decide to buy one.. be extra careful cuz i feel like it's gonna snap under my fingers.

___________________
Rocco's myspace here

quote:

Originally posted by Rocco yep agreed. Vestax is not the best name brand when it comes to mixers. It's more popular with hiphop/reggae DJs too. next time u go buy a mixer my friend, i recommend Behringer strongly. affordable yet not cheap, light weight yet heavy duty. It's an amazing mixer. or just go with club standards if u can afford em. Stay away from pioneers. The fadders and knobs feel like they're gonna break under u! if u decide to buy one.. be extra careful cuz i feel like it's gonna snap under my fingers.

well Mr. Rocco rocky,now u can have the vestex of mine,so u dun need to spend that much,u ganna take care of my baby vestex,k??

___________________
MUSIC FOR LIFE ~

quote:

Originally posted by nick_energy well Mr. Rocco rocky,now u can have the vestex of mine,so u dun need to spend that much,u ganna take care of my baby vestex,k??

nick, ur mixer is safe with me.i actually just opened up the faceplate and cleaned out all the dirt. Alotta cigeratte dust. i also air sprayed the x fader so it doesn't crackle and the new faders are on their way..
thnx again Nick..
and yes, the mixer will be very safe with me. It's my new baby

___________________
Rocco's myspace here

I Dont know what youre talking about, had my PCV-275 for over a year and it works great, the crossfader is smooth and works great, sound quality is great, no malfunctions what so ever...
Vestax are a great company for mixers, better then Pioneer by far.

___________________


SIGN THE "WE WANT SASHA & DIGWEED @ BUENOS AIRES ON DVD" PETITION!

the pcv fader is an interesting thing...

the metal that contacts the plating prolly isn't touching well enough. i used to have the mixer... well i still do but don't use it.

i actually broke off the metal bar on the bottom of the fader and forced the contacts on so they're running perectly.(then forced the contacts on and put the bar back in a kinda weird way) the only deal is it's a little sticky on one end and i'm not sure how long it'll last but there is not crackling.

if the bottom bar is not low enough, the fader will crackle. and in my opinion that should be covered under warranty 'cause it's a manufacturing defect but yeah...

if you wanna know more of what i did i'll tell you just gimme a shout and i'll explain it a little better.