You have got the cd rom and harddrive on seperate ide cables?

a) make sure the jumper on the harddrive is set to single or master ( it will say on the harddrive its self how to do this, if theres a single setting use that, if not use master)

b) make sure the harddrive is conected to the END conector on the ide cable, not the middle one.

___________________

Beware of killer hamsters and the random running dogs.

quote:

Originally posted by jonsimmonds You have got the cd rom and harddrive on seperate ide cables? a) make sure the jumper on the harddrive is set to single or master ( it will say on the harddrive its self how to do this, if theres a single setting use that, if not use master) b) make sure the harddrive is conected to the END conector on the ide cable, not the middle one.

Yes the hard drive & CD-RW are on different cables. I know I have my HD set to master...but I'll check if there is a single setting.

___________________
Please join the trancEaddict members Audioscrobbler/Last.FM group! (Click)

A few suggestions:
1) Restore factory defaults in the BIOS, then start from scratch.
2) Update your BIOS - this solves a ton of miscellaneous computer problems.
3) Check the jumper settings on your drive, sometimes they don't come with the correct settings (and "cable select" often doesn't work like it should, make sure it's "master").
4) Swap the cable if you have an extra, see if it changes anything.
5) Swap the hard drive if possible, or try using it in another PC.

If none of those work, it could be a hardware problem with the mobo or something... take the mobo, CPU, hard drive and memory to the store you got it at and get them to test it all for you (and if they try to pull a stunt like "We don't do that", then tell them "Fine, ALL these parts are defective, I want them ALL replaced!").

___________________
My party schedule:
2009-02-21 - DJ Attention @ I'm So Popular
2009-06-18 - DJ Annoying @ People Need To Know Where I'll Be
2012-11-32 - DJ Insufferable ɸ Or At Least the Stalkers I Complain About
2048-06-66 - Spastic & Whocares ¶ Although I'm Actually Flattered
9999-45-81 - Tweaker Gimp ☼ I Probably Won't Even Go To This But I Have To Make Sure I Fill Up All The Available Space Here

go to google.com and type in the Fing error

I changed my jumper settings from master to cable select and got an increase in boot time. It's still not terribly fast, but it's a hell of alot better than before.

___________________
Please join the trancEaddict members Audioscrobbler/Last.FM group! (Click)

I noticed you don't have a floppy, make sure it's not waiting for one. Go into bios and make sure ide is selected as first boot device. Cable select is horrible btw, don't use it unless you ABSOLUTELY have too. It could also be the kb/mouse not syncing up properly and causing your PC to 'wait' for them, but I doubt it. If your case is sharp check the IDE cable for any cuts, do the same with the PSU molex cables. I'd also suggest testing that power supply next time you get into windows, does ASUS have a monitor type program? If not, try MBM and make sure your PSU voltages stay consistant. Is the outlet grounded properly?

quote:

Originally posted by TeKnoHe@d2025 I changed my jumper settings from master to cable select and got an increase in boot time. It's still not terribly fast, but it's a hell of alot better than before.

basically, the worst idea...ever. no one does that, you shouldnt either

quote:

Originally posted by Orbax basically, the worst idea...ever. no one does that, you shouldnt either

Explain your reasoning...

___________________
Please join the trancEaddict members Audioscrobbler/Last.FM group! (Click)

quote:

Originally posted by TeKnoHe@d2025 Explain your reasoning...

because it never works properly and randomly causes drives not to be detected and/or read errors You're just asking for trouble, use master/slave settings

BTW, did you try any of my many suggestions, or are you pleasently ignoring them?

quote:

Originally posted by AvPPoW because it never works properly and randomly causes drives not to be detected and/or read errors You're just asking for trouble, use master/slave settings

Odd, because that is what I was getting using the master jumper. I do have a floppy, I just didn't list it because there its not really an essential item to list when showing specs.

As for your comment about the mouse & keyboard not syncing properly, you may be on to something with this. When I boot up sometimes my mouse is not working and I have to go in the back, unplug my mouse cord from the PS/2 slot and plug it back in. Then it works fine. I'm running the latest drivers as well.

For the voltage, I'm seeing that my +12V is running at about 11.8-11.9V which appears to be underpowered...but I don't know much about the power distribution in PCs.

___________________
Please join the trancEaddict members Audioscrobbler/Last.FM group! (Click)