How is the dutch sound acheived on the JP 8080. Also does anybody know how to make the Rank 1 synth from superstrings. I know they use the synth called La Fiesta on Bank 1 Number 3 but how do they tweak it to make it sound so crazy. What are the filter settings? Any help is welcome.

___________________
Don't TECHNO for an answer

Effects, effects and effects. I guess...

___________________
www.ultimatedjbattle.com

quote:

Originally posted by djkuruption How is the dutch sound acheived on the JP 8080. Also does anybody know how to make the Rank 1 synth from superstrings. I know they use the synth called La Fiesta on Bank 1 Number 3 but how do they tweak it to make it sound so crazy. What are the filter settings? Any help is welcome.

please post on example how far you can go on your own, then we know probably what is missing...

Trancevision

its all abt the supersaw...

___________________


Found Atlantis - Mixography [mix archive/mokumentary/my soul]?
i writed a song.

im not that good on the filter envelope i was wondering wat the settings should be for depth, a, d, s, r

also wat settings should be for amp envelope and the osc 1 control 1 and control 2 settings and osc 2 control 1 and 2 setting

___________________
Don't TECHNO for an answer

Hey dude i think i talked to you a bit on aim.. but i havent been on lately i just saw this post so i figured i would answer this to the best i could. I dont think that the La Fiesta Synth is used.

Disclaimer: i have only had my jp-8080 for about 2 weeks so im still new with it!

My attempt at the Rank 1 Airwave Sound

Sample: Save Targe As!!

Midi of melody: Save Targe As!!

Tutorial:

01. Start the JP-8080 and reset all the sounds to factory.
02. Select Performance U:11 (Sand Storm).
03. Change key mode to single and have upper selected.
04. Make Amp level maximum volume.
05. Change filter type to LPF.
06. Set Filter Cutoff Freq to Max (all the way up).
07. Set Amp Envelope A=1/2 D=Zero S=Full R=1/2.
08. Set Filter Envelope A=zero D=Zero S=Full R=Zero.
09. In OSC Common Set osc balance 2 clicks to the right (from center).
10. In OSC 1 Set Control 1 to 5 clicks to the right (from center).
11. In OSC 1 Set Control 2 to Full.
12. In Tone Control Set Treble to 3 clicks to the right (from center).
13. In Effects Set Multi-Fx Level to max.
14. In Effects, Delay Set Time to max.
15. In Effects, Delay Set Feedback to zero.
16. In Effects, Delay Set Level to Full.

If i havent forgotten anything.. that should be the sound your looking for and the sound i used in the sample. Its pretty close alomst exact i tried my best! I hope it helps.

As for the filter opening as the melody progresses.. its a simple Full Low Pass Filter with no resonance, no hi pass filter, and no band pass. The Cutoff starts around 30% and grows to 100 percent then again drops to 30% at the end.

I also added some slight reeverb.

I hope this works for you!

~Alphablue

::::::::::: EDITED ::::::::::::
My bad superstring is just a small change from my above tutorial.

Example: Save Target As!!

Tutorial:

1. Do my tutorial stated above.
2. Change Amp Envlope to A=Zero D=Full S=Zero R=1 click from bottom.
3. In Effects, Delay Turn Level to Zero

Thats It.

Effects I added to the sound:

Delay: Input=48%, Feedback=50%, Cutoff=Full, Steps=4 notes, Mode=Normal

Reeverb: Low Cut=75hz, highcut=4.0khz, predelay=0, roomsize=40, diffusion=100, color=flat, decay=1.5 seconds, highdamping=4.0khz, dry=100%, reeverb=25%

Filter is the same as mentioned in airwave.

Enjoy!

___________________
AudioPioneers |
RemixDesign Inc - Web Design |
homepage | sound design | myspace music

Last edited by rb2k1 on Nov-24-2003 at 20:33

That's one beatiful tutorial and your sound is spot on man. Thanks, I only wished you would've included an actual JP-8080 with that post

BTW, he was asking for Superstring, this was Airwave

Pretty much the same sound though...

added superstring tutorial above

___________________
AudioPioneers |
RemixDesign Inc - Web Design |
homepage | sound design | myspace music

Last edited by rb2k1 on Nov-24-2003 at 20:34

Excellent work mate.

Great to see people taking the time to explain patch programming and the sound youve acheived is very good!!

well done hope everyone appreciates this!

___________________
http://www.factoria.co.uk

sounds really good mate. Thank yu for sharing those hints

Trancevision