Registered: Sep 2001
Location: tranceaddict wants to know your location
nope
it didnt like being overclocked
system didnt boot up, when it did, i got a FAT error, some corruption in the MBR and well...caused a format as my hard drive was just being queer, showed up as negative space and well...it wasted a good 2 hours of my life...fucking thing.
check it, says 2000+ should be at 1.66, and I was wrong on the estimate of mine. eh.
Jan-17-2004 02:44
yujie__
Supreme tranceaddict
Registered: Mar 2001
Location: Somewhere over the Rainbow
my is happy at 2205 from a 1.47 (1700+)
Jan-17-2004 03:26
Tranc3
tranceaddict in training
Registered: May 2002
Location: Santa Cruz, CA, US
My 3000+ XP is 2.147Ghz stock...
Course the clock speed has nothing to do with actual computational speed, at least not anymore.
Jan-17-2004 03:39
DigiNut
You kids get off my lawn!
Registered: Dec 2002
Location: Toronto, Self-proclaimed Centre of the Universe
Re: techie help part 2 (processor remix)
quote:
Originally posted by KilldaDJ
amd athlon xp2000+
clock speed of abt 1.7 ghz right? or not as im only getting 1250mhz out of mine...
Sounds to me like your FSB speed is set too low. Let's say your FSB was set to 200 MHz to get that 1250 MHz, that gives a multiplier of 6.25 and if your FSB was set properly at 266 MHz then you'd have a 1663 MHz processor running speed.
What you probably don't want to do is change the multiplier. However, if the FSB speed is set lower than it should be, you can safely raise that to whatever your motherboard will support (if your motherboard doesn't support high enough FSB speeds, that may be part of the problem as well).
Hope that helps.
___________________
My party schedule:
2009-02-21 - DJ Attention @ I'm So Popular
2009-06-18 - DJ Annoying @ People Need To Know Where I'll Be
2012-11-32 - DJ Insufferable ɸ Or At Least the Stalkers I Complain About
2048-06-66 - Spastic & Whocares ¶ Although I'm Actually Flattered
9999-45-81 - Tweaker Gimp ☼ I Probably Won't Even Go To This But I Have To Make Sure I Fill Up All The Available Space Here
Jan-17-2004 03:41
Mystre
HyperStealth TranceAddict
Registered: May 2003
Location: NorCal
u sure u got a 2000+ shit ur pros sucks if its only goin 1250
I got 1800+ thats 1.53
My dads got a 2100+ which is about 1.79
___________________
Jan-17-2004 06:03
whiskers
old skool
Registered: Sep 2001
Location: in your dreams
Re: Re: techie help part 2 (processor remix)
quote:
Originally posted by DigiNut
Sounds to me like your FSB speed is set too low. Let's say your FSB was set to 200 MHz to get that 1250 MHz, that gives a multiplier of 6.25 and if your FSB was set properly at 266 MHz then you'd have a 1663 MHz processor running speed.
What you probably don't want to do is change the multiplier. However, if the FSB speed is set lower than it should be, you can safely raise that to whatever your motherboard will support (if your motherboard doesn't support high enough FSB speeds, that may be part of the problem as well).
Hope that helps.
yeah, i don't quite remember, but i think my XP2800 is set to 133FSB / 15x multiplier, which yields the default 2GHz
search www.groups.google.com for "athlon 2000 fsb setting" or something like that
techie help part 2 (processor remix)
