If it sounds fine in your headphone, the mixer is your problem.

___________________
Gear Specialist

quote:

Originally posted by DjVash If it sounds fine in your headphone, the mixer is your problem.

+1

you know, I've never "+1ed" anybody before....

___________________
Helping girls make bad decisions since 1979

Well, like I stated, when I swapped the carts, it was working perfectly fine.

Lemme break this down further:

First cart: headphones = fine, master out = not fine.
Another cart: headphones = fine, master out = fine.

I don't think I can break this down even further.

___________________
Blip, blip, blip...

Last edited by 3xx3r7 on Oct-21-2004 at 21:30

quote:

Originally posted by 3xx3r7 Well, like I stated, when I swapped the carts, it was working perfectly fine. Lemme break this down further: First cart: headphones = fine, master out = not fine. Another cart: headphones = fine, master out = fine. I don't think I can break this down even further.

okay, check this though. if there was bass in your headphones then obviously both carts were sending a bass signal to the mixer. the mixer then only reproduced bass in one of those circumstances, so obviously, its going to be a mixer problem. try again, maybe your mixer was just doing something weird. It can't be the cart from the way you have described it -- whether you break it down more or not

___________________
Helping girls make bad decisions since 1979

did you swap the carts between the two decks, and the problem followed?
Is the problem constant or intermitten?

Look carefully at the wires coming out of the cart if you can see them (i can on mine) maybe one of the wires has broken/come unplugged/unsoldered, other than that, i dont know. As for fixing it if it is that, not sure really, suppose it a new cart, unless you're really good at soldering

hope this helps

___________________
Check out my latest production work

Check out my latest mixes

Seems to work fine on my home turntables. Weird.

They use a Behringer console at the studio where I spun. I had to connect the setup to the console. Maybe that was part of the problem.

___________________
Blip, blip, blip...