Okay new n00b question for today from me...

I have a Xone 92 and I just got my monster TSR cables in so I tried to hook up my EFX 500. I put the L/R from Aux 1 (on the Xone) to L/R on the Input (on the EFX). I then put the L/R from the Output (on the EFX) to the Retrun 1 (on the Xone).

Now how do I get the bloody thing to work? I'm not picking up any signal on the Input Level on the EFX or the Effect Out Level. I have the In & Out Level on the EFX to -10db (as suggested in the manual) and the front of the EFX is set to Master.

How do I get this thing working and test it out?

Cheers,
Keith

Anyone? I've since tried hooking it up to Return 2 on the Xone (that is what the Xone manual showed) and can only hear the effects in the headphones (when plugged into the EFX 500) when I turn the knob on the Xone Aux 1 (at the top of the Xone) all the way up. But I can't seem to get the EFX to send the effects out to the Xone?

-Keith

did u try askin on the xone forums? im pretty sure i saw the same topic there

quote:

Originally posted by keithos27 Anyone? I've since tried hooking it up to Return 2 on the Xone (that is what the Xone manual showed) and can only hear the effects in the headphones (when plugged into the EFX 500) when I turn the knob on the Xone Aux 1 (at the top of the Xone) all the way up. But I can't seem to get the EFX to send the effects out to the Xone? -Keith

You checked the knob on the upper right of the EFX? is it 'open' ?
Does the led's give some signal?

If they do, then you have to look @ your mixer.

Just put the cable on output 2 from your mixer to your EFX.
And then the output from the EFX to AUX 2

Does this work? if yes... maybe your send is broken from your mixer?

___________________
[LEFT]ERROR 406: file corrupt: config.earth -- reboot universe? (Y/N)[/LEFT]

This is how I connect mine

-MIXER AUX 2 to INPUT on efx 500
-OUTPUT on efx 500 to MIXER RETURN 2
-set MIC/RETURN switch to RETURN
-then DUCK/OFF/ON switch to ON
-turn the AUX 2 knob on the channel you want and press the PRE switch to the DOWN setting.
- adjust the AUX 2 knob accordingly on how loud you want the effect signal to be.

Last edited by k-cee on Jan-23-2005 at 07:27

try hookin it up to the midi output

The midi output isn't that accurate as you have to tap in the beats on the xone.

ah ok... i have a xone 92 myself, but efx processor