do you have both the red and white rca cables plugged in?

___________________

quote:

Originally posted by Ken_Allen do you have both the red and white rca cables plugged in?

yes, the wires from the first of the 2 decks are plugged in the red and white areas of channel 3... should they be going into phono 3 or line 3 ? its a 3 channel mixer, sorry for being thick, very new to DJ'ing and just getting started

what would you recommend pluggin the left hand deck into, line 1, phono 1, line 2, phono 2, line 3 or phono 3?

Cheers,

___________________
You want the truth, you cant handle the truth!

phono 1

Phono Is an amp for the turntables since turntables give out a VERY low signal...line will not amp it and if you put a cdj or your computer on a phono, it will kill your ears if you turn the stereo up & forget to turn it down before trying anything & remember to switch it to phono above the faders

also, on try moving that fader underneath cue level & the three channel buttons (the sideways one)

___________________

Hehe okay, let me give that a go now...should sound then come out of both ears of my headphones? I need to move the other deck from my other room later on.. but for now I wanted to listen to some tunes on vinyl before i move the other deck.

___________________
You want the truth, you cant handle the truth!

try moving that fader underneath cue level & the three channel buttons (the sideways one) for both ears

___________________

hmm

I just plugged in the red and white rca cables into phono 1 and when I flicked the switched to line 1 / phono 1 instead of MIC I am seeing nothing on the EQ

___________________
You want the truth, you cant handle the truth!

Flip the Phono/Line Switch to phono above the 3 faders

___________________

the cue - pgm fader is moved all the way to PGM, I have put the fader in the middle (it says channel 2 for left and channel 3 for right) :/

___________________
You want the truth, you cant handle the truth!

I did that dude

channel 1 is flicked to "line 1 / phono 1"
channel 2 is flicked to phono 2
channel 3 is flicked to phono 3

cue assign button is pressed in for CH-1 but I am getting no display on the EQ

cue/pgm slider is all the way to the right (PGM)
fader is in the middle

___________________
You want the truth, you cant handle the truth!

Yeah...I don't know about the headphones, the port could be blown, or your headphones to mic adapter could be blown

For the deck thing, plug it into Phono 2, and move the crossfader to the middle and then flip the switch to phono, above the faders

___________________

quote:

Originally posted by Ken_Allen Yeah...I don't know about the headphones, the port could be blown, or your headphones to mic adapter could be blown For the deck thing, plug it into Phono 2, and move the crossfader to the middle and then flip the switch to phono, above the faders

I highly doubt the headphones are buggered, I bought them BRAND NEW, and they worked fine when I tested them on an old amplifier I had in the other room where I used to listen to music on 1 deck that I had set up.

I'll give the phono 2 thing a go now.

___________________
You want the truth, you cant handle the truth!